Thingiverse
Martian II Flight Control Holder by Blomdoft
by Thingiverse
Last crawled date: 4 years, 5 months ago
So sometimes, your motors are too powerful or your gyro is too sensitive and you get glitches and what not with a fix mounted flight control. I had this problem with the RS2205 motors in combination with LittleBeeS 30A and MPU6500.
This holder for the flight controller needs to be printed in flexible plastic like TPU. You can then bolt the part down with the original nuts and sleeve in the controller.
At least for my copter this solved all the problems I had before, and it is even looking quite okay.
As this is an OpenSCAD file, if you still have problems, you might be able to even add more dampening.
It is part of a series of three, I am using it combined with a Martian II GoPro Holder and a Martian II Antenna Holder.
This holder for the flight controller needs to be printed in flexible plastic like TPU. You can then bolt the part down with the original nuts and sleeve in the controller.
At least for my copter this solved all the problems I had before, and it is even looking quite okay.
As this is an OpenSCAD file, if you still have problems, you might be able to even add more dampening.
It is part of a series of three, I am using it combined with a Martian II GoPro Holder and a Martian II Antenna Holder.