Thingiverse
Marlin 2.0 bugfix for A10T/A10M with 4.1b board only by kf1zradio
by Thingiverse
Last crawled date: 4 years, 1 month ago
Marlin bugfix 2.0.x from mid january .
This is for use with A10M, A10T with GT2560 Ver4.1b boards ONLY !!!!!!!!!!
It is set up for A10T
To use with A10M, simply change
define MIXING_STEPPERS 3
to
define MIXING_STEPPERS 2
AND
define NUM_RUNOUT_SENSORS 3
to
define NUM_RUNOUT_SENSORS 2
Compile / flash with VScode / Platformio only.
NOT Arduino IDE.
USE AT YOUR OWN RISK.
I WILL ACCEPT NO RESPONSIBILITY FOR WHAT YOU DO
TO YOUR PRINTER !!!!!!!!!!
This is for use with A10M, A10T with GT2560 Ver4.1b boards ONLY !!!!!!!!!!
It is set up for A10T
To use with A10M, simply change
define MIXING_STEPPERS 3
to
define MIXING_STEPPERS 2
AND
define NUM_RUNOUT_SENSORS 3
to
define NUM_RUNOUT_SENSORS 2
Compile / flash with VScode / Platformio only.
NOT Arduino IDE.
USE AT YOUR OWN RISK.
I WILL ACCEPT NO RESPONSIBILITY FOR WHAT YOU DO
TO YOUR PRINTER !!!!!!!!!!