Marlin 1.1.9 & Repetier v92.9 Firmware FlyingBear P902 Multilang by PelouseTech

Last crawled date: 3 years ago

--- IF YOU FIND IT USEFUL PLEASE TIP ME ---
MARLIN UPDATED TO 1.1.9 (ADDED: Quick Home and S Curve Acceleration)
NOTES:
The Marlin Perfect is the original firmware with the modifications described below
The other firmwares (1.1.3 to 1.1.9) are updated firmwares from marlinfw and modified to work with P902
For Language option please read below
This is a slightly modified firmware for the P902.

X has -9mm offset and Y has -1 (so X0 Y0 is the corner of the bed)

It has all the motors calibrated (X, Y, Z and Extruder)
-Acceleration and Jerk has been decreased to avoid shakes from the machine (the print time is a little slower but quality is improved) You can change these setting from the LCD menu, remember to save the setting to EEPROM so they are kept after a reboot.
NOTE: Calibrated with PLA, if you are printing with ABS please scale your objects from 100% to 100.53%

BABYSTEPS enabled, this helps to correct the level of Z while printing, really helpful for first layer corrections.


THERMAL RUNAWAY enabled (If any of the thermistors fails, the print stops, this prevents the printer from burning in flames because of overheating)

It has EEPROM enabled (You can save your own preheat defaults and many other settings)
NOTE: For the calibration and preheat settings to work you must do a "Restore Failsafe" from the "Control" menu and then "Store Memory". If you don't do the Restore failsafe the calibration settings won't take effect, and if you don't do the store memory after, the new settings will be erased after reboot.

The CHANGE FILAMENT now works (was disabled by default) It will pause the print, lower the bed 10 mm and move the head to the lower right corner as well as making a beeping noise to let you know, just change the filament and click the knob to continue.


The knob direction has been changed.


The Z speed has been raised to 10 mm/s

The homing Z speed has been raised to 6 mm/s
FOR LANGUAGE CHANGE PLEASE GO TO CONFIGURATION.H AND LOOK FOR "LCD_LANGUAGE" AND CHANGE THE VALUE AS FOLLOWS (Example: LCD_LANGUAGE en):
en English
an Aragonese
bg Bulgarian
ca Catalan
cn Chinese
cz Czech
de German
el Greek
el-gr Greek (Greece)
es Spanish
eu Basque-Euskera
fi Finnish
fr French
gl Galician
hr Croatian
it Italian
kana Japanese
kana_utf8 Japanese (UTF8)
nl Dutch
pl Polish
pt Portuguese
pt-br Portuguese (Brazilian)
pt-br_utf8 Portuguese (Brazilian UTF8)
pt_utf8 Portuguese (UTF8)
ru Russian
tr Turkish
uk Ukrainian
REPETIER:
V 92.9
Configured and calibrated as Marlin
NOTE FOR MULTILANG: It only has English and Spanish enabled. If I load all the languages to the firmware it won't fit; If you want to change or load new languages here are the intructions:
DOWNLOAD THE FIRMWARE FROM THING
UNZIP
GO TO https://www.repetier.com/firmware/v092/
SELECT UPLOAD OLD CONFIGURATION
BROWSE THE REPETIER FOLDER YOU UNZIPPED BEFORE AND LOOK FOR CONFIGURATION.H
GO TO USER INTERFACE IN THE UPPER PART
UNDER DISPLAY LANGUAGES SELECT THE ONES YOU WANT (IF YOU EXCEED THE LANGUAGES ALLOWED YOU WILL GET A WARNING AT THE LAST PAGE)
GO ALL THE WAY DOWN AND CLICK NEXT STEP TWICE (UNTIL YOU GET TO THE DOWNLOAD PAGE)
SELECT DOWNLOAD CONFIGURATION.H AND DOWNLOAD TO REPETIER FOLDER AND REPLACE FILE.
UPLOAD TO PRINTER
I added a thin calibration object so you don't waste that much filament. I just print it an leave it sticked to the bed so I can measure X and Y without problems or bending, then I remove the piece and meazure Z.
You can visit my other things, almost everything is for the Flyingbear.
IF YOU FIND THIS USEFUL PLEASE AT LEAST SAY THANK YOU