Marlin 1.1.9 for Anycubic kossel linear plus by maviles798

Last crawled date: 4 years ago

Marlin 1.1.9 for Anycubic kossel linear plus Auto leveling, stuck drivers, cooling fan for drivers Pin7 (FAN1) on Trigorilla.
There is a piston that you can print, is a work in progress but i needed to upload an stl file in order to get the publish the other files
To make it work you just have to download the Marlin firmware 1.1.9 in this linkhttps://github.com/MarlinFirmware/Marlin
Next you have to download the Configuration.h and Configuration_adv.h that are in this page.
Then for the last part you have to drag this files in to the Marlin folder and replace the ones that are in the Folder in the Firmware file.
To know if you did it right you have to enter the marlin folder and find the arduino file and open it.
Inside the file click in Configuration.h and scroll down.
On the first lines under Sacra Printer you must see these lines
define STRING_CONFIG_H_AUTHOR "(Maviles798, Linear Plus)" // Who made the changes. DaHai: Change if you wish - informational only
define SHOW_BOOTSCREEN
define STRING_SPLASH_LINE1 "1.1.9" // will be shown during bootup in line 1
define STRING_SPLASH_LINE2 "Maviles linear p"
If you have this changes you are ready to upload the firmware to your board and you can continue to watch the video below to calibrate your printer.
Don't forget to like the video.
Here is a video on how to calibrate with this firmwarehttps://www.youtube.com/watch?v=GF6ZGKOuzhY&t=0s&list=PLz-ug70VBHjoAEoV4tHgU4aE41rcOTogx&index=4