Marine Boat - Inspection Hatch 220mm

Last crawled date: 4 years, 4 months ago

Marine Boat - Inspection Hatch 220mm
Update : New Grill Cover Set
Two versions of covers, for deck ( with anti slip grid) and wall (flat surface); each one with three strength types.
It comes with three gasket versions, with compression of 2, 1.5 and 1.0mm .
Print the gaskets using TPU filament.
Keep in mind that the gasket have a trapezoidal section, and it will required to be press fit to position!
If you have problems printing TPU see my Cura settings for some TPU printed parts:https://www.thingiverse.com/thing:3812899
...however, in the sample mention above I use a FLOW of 130%. Those gaskets needs to be somehow elastic, and not so stiff! I recommend to use a flexible filament... and a flow of 100%!
If anyone know better settings for our situation here... welcome to share the info!
It use M6 countersunk bolts - 8 units.
All parts are check for naked edges or errors - therefore ... all are going to be printable! If the design is good or if the parts are going to fit... that's another story!
Design to print with support... :( By Costa