Thingiverse

Manuka Gyroscope Bumper by DieterMeier
by Thingiverse
Last crawled date: 4 years, 4 months ago
The bumper broke and I designed it a little bit thicker.
2mm longer screws are needed.
You only need support in the middle of the arc - I used a support enforcer 25x25mm in prusaslicer.
The last layers look better, if the layer hight is down to 0.07mm.
2mm longer screws are needed.
You only need support in the middle of the arc - I used a support enforcer 25x25mm in prusaslicer.
The last layers look better, if the layer hight is down to 0.07mm.