Manual 1980s Style Juicer - Version 2 with Solidworks 2014 source. by DarkAlchemist

Last crawled date: 3 years, 1 month ago

This is a more printer friendly version of my earlier work and while version 1 ( http://www.thingiverse.com/thing:33652 ) was more accurate to the original 1980's design (I changed a couple of things to help printers like the tiny teeth that just can't be printed) it wasn't as friendly to 3d printers as needed. I finally revisited the model and had to start from scratch so this time I used much thicker walls, and the piercing teeth are double the size as well. The grip handles are thicker as well.
Version 1 source files are not to be found so I was forced to start over.
Description/How to use for Juicer V1 and V2:
This is a juicer that was very popular in the 1980's into the 1990's. Insert the end with the teeth into an orange, or grapefruit, etc..., and twist until you completely pierce the skin. Now remove the juicer and in the bottom end will be the skin. Remove that skin and reinsert the juicer all the way inside and this time squeeze the citrus fruit. Out of the small hole will come forth the seed free juice.