Thingiverse
Mando Action Figure by ternarydesign
by Thingiverse
Last crawled date: 5 years ago
A set of models which come together to form an action figure based on Mando.
One of everything, except two mando_feet and 10 mando_joint(s).
WARNING: these parts take a lot of work to put together, the objects have peg holes for pegs/ball joints, but you will likely need to do some work to get everything to go together tightly. Also, the ball sockets are EXTREMELY tight. I found that PLA to have quite a bit of give so I pushed it as far as I could while still being able to assemble. See printing and post-printing for more details and advice.
One of everything, except two mando_feet and 10 mando_joint(s).
WARNING: these parts take a lot of work to put together, the objects have peg holes for pegs/ball joints, but you will likely need to do some work to get everything to go together tightly. Also, the ball sockets are EXTREMELY tight. I found that PLA to have quite a bit of give so I pushed it as far as I could while still being able to assemble. See printing and post-printing for more details and advice.