Thingiverse
Malyan M180 and Flexion Dual Extruder X-Carriage by Heliart
by Thingiverse
Last crawled date: 3 years ago
I redesigned the x-carriage from axelfrom, because I liked to use the Igus RJ4JP 01-08 slide bearings.If you mount the Igus bearings you have to be aware that the bearings are absolute parallel, I controlled this with the x-rod. If the rod slides easily and if the x-carriage falls free, if you put the rod vertical, then you can fix the bearings with a drop of medium superglue.
I also turned the hotend blocks by 90 degress to get more space between the blocks for the cables. For this reason I had to widen up the inner opening.
Because the hotend blocks are still close to the x-carriage I applied a aluminium tape to the x-carriage.
I printed the x-carriage upside down to minimize the the support structure. I also closed the fixing holes on the top with one layer, cause printing holes on the support becomes really ugly.
I also turned the hotend blocks by 90 degress to get more space between the blocks for the cables. For this reason I had to widen up the inner opening.
Because the hotend blocks are still close to the x-carriage I applied a aluminium tape to the x-carriage.
I printed the x-carriage upside down to minimize the the support structure. I also closed the fixing holes on the top with one layer, cause printing holes on the support becomes really ugly.
Similar models
thingiverse
free
X Carriage for Igus Pillow Block Bearings with Rear Fan Mount by 3dSuppli
... with room for an extruder fan mount on the rear of the carriage.
i specifically use this x carriage on mendelmax 1.5 printers.
thingiverse
free
igus replacement for Prusa I3 MK2(s) by Knickohr
...s for the mk2, it will work for the mk2s too, but with the old disadvantages.
update :
fixed another belt rubbing at the carriage
thingiverse
free
X-Carriage (with sensormount & cablechain) for Wilson 2 - 4 Bearings Remix by darealmoo
...on 2 - 4 bearings remix by darealmoo
thingiverse
.. remixed the carriage, because the igus-bushings are a bit loose on the rods.
thingiverse
free
HyperCube LMU10UU X Axis Carriage (also Igus RJ4JP-01-10) by henryarnold
...
print the x axis carriage and two bearing caps. depending on your printer you may want to print the bearing caps with supports.
thingiverse
free
Anet A8 e3d v6 Bowden Print Carriage Redux Remix for CloneE3D by RPSthlm
...tting stress on the rods if they are wider or closer together. props to the original creator for making such an awesome carriage!
thingiverse
free
X carriage for igus pillow block bearings with rear fan mount with rotated extruder mounting by orias
...nut traps so the wade's extruder stepper motor can be angled away from the threaded rod for an extra few mm of x axis travel.
thingiverse
free
Simple SC8UU Bearing Block by aMpeX_fhm
...bearing hole: 15.2mm
disclaimer:
i have not yet printed this myself, so please let me know if anything is terribly wrong with it.
thingiverse
free
Y-Carriage
...ted,
but you can also glue.
!! if it slides poorly, i use silicone spray or silicone oil, as this is compatible with plastics. !!
thingiverse
free
X Carriage for E3D Nozzle by Emadine
...m and most x carriage have not enough room for it so i make this, this is for the 50mm apart smooth rod and 50mm extruder mount.
thingiverse
free
Lewihe Play 3D carriage for E3DV6 with printed bearings by frikeldon
...y 3d with e3dv6 hotend with low z loss. hotend support includes printed bearings, for than reason is better to print it with pla.
Heliart
thingiverse
free
Case for RunCam OWL700 TVL by Heliart
...x the case on the quadcopter.
in the 2nd picture you can see the position i printed the two parts. this gave me the best results.
thingiverse
free
Case GPS U-Blox Neo 6M by Heliart
.... to fix the lid on the box, i put four holes into it.
the cable leads through the cut-out of the case and the hole of cs2 plate.
thingiverse
free
Volkswagen Boxer Cylinder Head (Scale 1:3) by Heliart
...ith superglue.
i printed the three cylinder parts with pla, color steal-grey and the valve cover with a composite aluminium pla .
thingiverse
free
Malyan M180 and Flexion Dual Extruder Cooling Unit by Heliart
... and designed some more stuff to get a functional and nice looking print head. the other parts i will publish in the near future.
M180
thingiverse
free
Malayan M180 Carriage by Marchie
...verse
this is a redesigned m180 carriage which will take 24mm linear bearings, instead of the 17mm bearings supplied by malayan.
thingiverse
free
Malyan M180 Extruder Mount by SidneyKi
...y sidneyki
thingiverse
malyan m180 extruder mount.
i have also included a extruder mount that will support 24mm linear bearings.
thingiverse
free
Malyan M180 knob by pingstnet
...malyan m180 knob by pingstnet
thingiverse
knob for a much easier use of the control panel. klick on the center to avoid turning.
thingiverse
free
Malyan M180 fan grid / protector with logo by Laur3nt
...
pimp your m180 printhead with this fan grid!
print it as dual-extrusion thing or seperated and glu them together with the logo.
thingiverse
free
Malyan M180/Freesculpt EX2 Axis fixation by acefx
...rse
replacement part for malyan m180 / freesculpt ex2
plastic part for rods anchors who tends to break
credits goes to 3d-p.ua !
thingiverse
free
Leg Pad Malyan M180 / Freesculpt EX1 - EX2 by acefx
...reesculpt ex1 - ex2 by acefx
thingiverse
improved leg pad for malyan m180 / freesculpt ex1 - ex2
2 versions with/out screw pad
thingiverse
free
Malyan M180 Spool Holder by Thump2010
...use but being the same height as the originals and designed to used the bearings from the original holders.
added a 58 mm version
thingiverse
free
Malyan M180 / Freesculpt EX2 filament Funnel by acefx
...nian idea ( 3d-p ) i release the filament funnel guide for malyan m180 / freesculpt ex2 .
not tested yet, more pictures to come
thingiverse
free
Malyan M180 dual web cam holder by klawndyke
...that holds 2 webcams model wc04. total cost at the time of making was 19$ for 2 cams and filament..
https://youtu.be/vj2p3ux0p3q
thingiverse
free
vertical storage for glass bed for the side of malyan M180 by antoinefro
...ed for the side of malyan m180 in 3 part inspired by the freesculpt ex 2 from djflo68260https://www.thingiverse.com/thing:1239011
Flexion
thingiverse
free
Ender 3 - Flexion by danielroibert
...ender 3 - flexion by danielroibert
thingiverse
adapter for flexion on a ender 3
thingiverse
free
Palm Flexion by JayJo
...onger linkages together
makes a specifically oriented palm plate
for finger flexion attachment
twin grip pads fit in each linkage
thingiverse
free
Flexion Extruder Fanduct by huge11
...flexion extruder fanduct by huge11
thingiverse
later more
thingiverse
free
Flexion HT Spare head holder by KaTZWorld
...xion ht spare nozzles and tools for the monoprice maker select
designed in fusion 360 printed in petg with the flexion ht nozzle
thingiverse
free
Box for Flexion Extruder by rdsail
...box for flexion extruder by rdsail
thingiverse
printed .2 in petg
thingiverse
free
BLTouch Mount for Flexion E3D by zanthor
...d work with pretty much anything.
offsets are roughly as below:
x_probe_offset_from_extruder -25
y_probe_offset_from_extruder -29
thingiverse
free
Flexion single Extruder box insert by shadowflee
...r + 2 nozzle holes
v1.1 now allows you to close the box :) and takes less filament
bitcoin: 1eo4b4bqp8ctutk8rfqxzgyrljjstuzywz
thingiverse
free
Flexion PTFE Tube Mount by EyeWolfDesign
...to hold the ptfe tubing there is two sizes are available m10 and m6. to screw the flexion mount to the assembly use a m3 x 8mm.
thingiverse
free
FT-5 Flexion Extruder Part Cooling Fan by Cbarkie
...ft-5 flexion extruder part cooling fan by cbarkie
thingiverse
part cooling fan for flexion extruder on the ft-5
thingiverse
free
CR-10 Flexion bracket by Cero_
... on the ptfe tube that goes against the flexion drive unit. it should be pushed against the nip point with the cam on position 4.
Malyan
thingiverse
free
Malyan Part Cooler by PhunkMaster
... cooler from the malyan website, for the m180. found here: http://wiki.malyansys.com/doku.php?id=is_there_a_nozzle_cooler_on_m180
thingiverse
free
Levier extrudeur Malyan M150 by gael12345678901
...levier extrudeur malyan m150 by gael12345678901
thingiverse
levier extrudeur malyan m150, à imprimer en petg de préférence.
thingiverse
free
Malyan M150 Adjustable Z Endstop by Chefhandwerker
...malyan m150 adjustable z endstop by chefhandwerker
thingiverse
adjustable z endstop for the malyan m150
thingiverse
free
Malyan M150 hotend cooler by cornneliu
...m150 hotend cooler by cornneliu
thingiverse
this is a hotend cooler for malyan m150 - 3d printer, 30mm fan (original hotend fan)
thingiverse
free
Malyan M150 Spool Holder by barees63
... by barees63
thingiverse
just a simple mount to attach an 8mm threaded rod to the stock spool holder bracket on the malyan m150.
thingiverse
free
Malyan M180 Extruder Mount by SidneyKi
...y sidneyki
thingiverse
malyan m180 extruder mount.
i have also included a extruder mount that will support 24mm linear bearings.
thingiverse
free
Riemenspanner Malyan M150 by Popkart
...riemenspanner malyan m150 by popkart
thingiverse
layer 0,2
infill 15%
thingiverse
free
Malyan M150 Tools Holder by cornneliu
...and pliers (on the front) and for scraper and other tools you might have (on the right side).
i suggest printing it with support.
thingiverse
free
Malyan M150 support bracket by fornomoo
...iverse
malyan m150 diiicooler support bracket.
print oversize by 124% or adjust for fit
use 5015 50mm turbine blower cooling fan
thingiverse
free
Malyan M150 spool holder by DigimonXP
...n m150 3d printer.
can be installed on top of the printer frame or top of the controller.
works nice with 2x500g or 1x1kg spools.
Carriage
archibase_planet
free
Carriage
...arriage
archibase planet
perambulator baby carriage pram
carriage n250908 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
free
carriage
...carriage
3dexport
old fashion carriage model, more files here:
turbosquid
$140
Carriage
...urbosquid
royalty free 3d model carriage for download as max on turbosquid: 3d models for games, architecture, videos. (1482052)
turbosquid
$25
Carriage
...urbosquid
royalty free 3d model carriage for download as max on turbosquid: 3d models for games, architecture, videos. (1285944)
3d_export
free
carriage
...carriage
3dexport
game cart
3d_ocean
$15
Barrel Carriage
...ieval oak old transport wheels wine wood
this model contains a barrel and a carriage. it is a medieval type of wood oak carriage.
turbosquid
$40
Carriage
...ty free 3d model carriage for download as obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1290094)
turbosquid
free
Carriage
...yalty free 3d model carriage for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1239157)
3d_export
$5
Medieval carriage
...medieval carriage
3dexport
medieval carriage in fairy style
turbosquid
$58
Carriage
...d model carriage with scene for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1276262)
Dual
turbosquid
free
Dual Pistols
...ls
turbosquid
free 3d model dual pistols for download as fbx on turbosquid: 3d models for games, architecture, videos. (1320360)
turbosquid
$2
Dual Axe
...urbosquid
royalty free 3d model dual axe for download as fbx on turbosquid: 3d models for games, architecture, videos. (1332372)
turbosquid
$10
Dual Lesaths
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
плитка Dual Bianco (Испания)
...й плитки venis dual (испания). технические качества: устойчивость к стирания, отличная геометрия, отсутствие проблем при укладке.
turbosquid
$35
Dual Mesh Fonts
...ree 3d model dual mesh fonts for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1352989)
turbosquid
$29
Dual Flask with Bungs
...del dual flask with bungs for download as obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1210512)
turbosquid
$19
Dual Socket Plug
...3d model dual socket plug for download as obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1303912)
turbosquid
$13
Dual Adjustable Pulley
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
Amoi N809 Dual
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
Dual Turret Tank
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Extruder
3ddd
$1
Extruded Chair
...extruded chair
3ddd
extruded , tom dixon
inspired by tom dixon extruded chair
turbosquid
$15
Extruded Table
... extruded table for download as blend, dae, fbx, obj, and stl on turbosquid: 3d models for games, architecture, videos. (1634137)
turbosquid
$2
3D Printer Extruder
...d
royalty free 3d model 3d printer extruder for download as on turbosquid: 3d models for games, architecture, videos. (1537359)
turbosquid
$1
Zombie extruded text
...oyalty free 3d model zombie extruded text for download as obj on turbosquid: 3d models for games, architecture, videos. (1322198)
turbosquid
$4
Extruder conical screw
...el extruder conical screw for download as sldpr, ige, and stl on turbosquid: 3d models for games, architecture, videos. (1524433)
turbosquid
$50
3d PRINTER - Extruder
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
Extruded Table 2
...xtruded table 2 for download as blend, dae, fbx, obj, and stl on turbosquid: 3d models for games, architecture, videos. (1621846)
turbosquid
$10
Maya Extrude Tool
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
world earth extrude map
...world earth extrude map
3dexport
3ddd
$1
Simply Elegant Extruded Tree Coffee Table Design
...ble by link studios. the silhouette of a tree is visible at one angle, extruded from the surface to create the support structure.