Thingiverse
Makerfarm i3v hexagon fan shroud with material fan by Mattstrike
by Thingiverse
Last crawled date: 4 years, 1 month ago
This is a fan shroud for that incorporates both a hot end and material fan. I used this on my 10" Makerfarm i3v with the 1.75/0.4mm hexagon hot end.
I used this in conjunction with my custom X carriage to draw air past the hot end and eject it upward and away from the print bed. I use the material fan to blow at the bed for PLA and away from the bed when printing with ABS or PETg.
I used this in conjunction with my custom X carriage to draw air past the hot end and eject it upward and away from the print bed. I use the material fan to blow at the bed for PLA and away from the bed when printing with ABS or PETg.