Thingiverse
Makerbot Method to Makerbot Replicator/Replicator+ Spool adapter by MysticTurtle
by Thingiverse
Last crawled date: 4 years, 5 months ago
This is an adapter i made to solve a problem we had at work where some makerbot method series filament rolls were ordered. while we only have makerbot replicator and makerbot replicator+
This allows you to mount the makerbot method spools onto the replicator series machines.
You will likely have to drill a small 2mm hole on the left hand side of the filament housing to feed the PTFE tube from the left hand side (facing the printer) because the way the spools are wound, they can not be fed from the "stock side" without bending in weird ways.
Hope this helps some of you!
This allows you to mount the makerbot method spools onto the replicator series machines.
You will likely have to drill a small 2mm hole on the left hand side of the filament housing to feed the PTFE tube from the left hand side (facing the printer) because the way the spools are wound, they can not be fed from the "stock side" without bending in weird ways.
Hope this helps some of you!