Thingiverse
MagSDHolder by MadVampy
by Thingiverse
Last crawled date: 3 years ago
Needed a SD card holder for my 3D printer and didn't see any that would work for me. I wanted at least a 4 SD card holder and wanted it to be easily removable if I moved my printer. There were a few designs that clipped over the edge of the door opening but would interfere with the door. SO I decided to start from scratch. The holder uses a rare earth magnet and simply sticks to the metal housing of the printer where ever I want to place it, this won't work on your printer if has a plastic, wood, or aluminum frame or housing to it.
I used some of the extra magnets I had from my GoPro Mag Mounthttps://www.thingiverse.com/thing:1949608 that I designed. The link below is the site I got the magnets from but any 15mm x 5mm magnet will work. I used them because I had extras and also being rare earth type they hold very well. I used a dab of silicon in the hole to hold the magnet in place. The slots are also keyed (the 45* angle on the card is on the left) so they are always contact down and label towards you. Hit the LIKE button if you liked the design and feel free to comment also.
Magnets I used: https://www.apexmagnets.com/15mm-diameter-x-5mm-thick-disc
I used some of the extra magnets I had from my GoPro Mag Mounthttps://www.thingiverse.com/thing:1949608 that I designed. The link below is the site I got the magnets from but any 15mm x 5mm magnet will work. I used them because I had extras and also being rare earth type they hold very well. I used a dab of silicon in the hole to hold the magnet in place. The slots are also keyed (the 45* angle on the card is on the left) so they are always contact down and label towards you. Hit the LIKE button if you liked the design and feel free to comment also.
Magnets I used: https://www.apexmagnets.com/15mm-diameter-x-5mm-thick-disc
Similar models
thingiverse
free
SD Card Holder by smontanus
...and organizing the cards but i didn't come across any that would hold the cards in the protective cases so i designed my own.
thingiverse
free
SD Card Holder For Makerbot by datafusions
...dn't want to loose the sd card on my workbench when not is use, so i decided a small and easy card holder would do the trick.
thingiverse
free
Memory Card Holder by BostH
...ly in place.
the carrier has:
seven slots for micro sd cards,
one big slot for up to six sd cards and
three slots for usb sticks.
thingiverse
free
Magnetized Fridge Box
...ably. back includes space for 6 recessed rare earth magnets.
add some extra space (~0.2mm) to comfortably accommodate the magnets
thingiverse
free
Ender 3 SD Card Clip Holder by casualcraig84
...lcraig84
thingiverse
i wanted an sd card holder that would clip on the side so i wouldn't lose it so decided to design this.
thingiverse
free
SD and USB card holder by abarlowe
...39;t use as many sd cards as in other sd card holders on thingiverse and needed two usb holding places so i made this in sketchup
thingiverse
free
Hexigon Desk Organizer With USB and SD-Card slot
...tween so it's not easy to get out. it works for me as i rarely use my extra sd cards, and only made it so it's organized.
thingiverse
free
SD Card Holder Prusa i3 by wjordan819
... tabs to stick it in place.
i used supports from the bed only and did have to file the slot slightly to get the card to slide in.
thingiverse
free
(Anet E10 / CR-10 / CR-10 clone) control box display cover with magnets by MarioMacedo
...really strong as you can see in the video.
i glued the magnets using superglue, paying special attention to the magnets polarity.
thingiverse
free
Brice's Desktop Organizer by neosho3d
...would not fit. also if something did not work i would be able to look at it in my hand and be able to see everything i needed to.
Madvampy
thingiverse
free
CapNRing by MadVampy
...to allow for that. i'll add both the one with and without the o-ring holder. printed this in abs (as i do with all my prints)
thingiverse
free
RamTray by MadVampy
...lined up pretty good (might have to tweak yours depending on the material you use to print it).
not much more to say on this one.
thingiverse
free
Hanger by MadVampy
...cal surface like a wall or such. went with 100% infill for strength but if your object isn't heavy you can reduce the infill.
thingiverse
free
Handle by MadVampy
... 100% infill to make it strong for when i was breaking them apart.
please feel free to make any changes to suit your needs. enjoy
thingiverse
free
Pokemon Stand by MadVampy
...ign. hope you enjoy it! post comments and also like it if you feel so inclined. also if you do a print share it with others here.
thingiverse
free
Power Block by MadVampy
... from any metal it may be attached to. the bolt is a snug fit so there will not be any twisting of it inside the printed plastic.
thingiverse
free
Blind Holders by MadVampy
... blind. i laid them on their backs so there is no need for rafts or support.
this is my first design so go easy on me. lol enjoy!
thingiverse
free
Dead Pool Buckles by MadVampy
...now these were measured and printed for the size deadpool that i did you may have to adjust the scaling to fit the one you print.
thingiverse
free
Big Handle by MadVampy
...liers to remove it. this is a large handle measuring 4" x 6" so you can scale it as you need.
modify it as you see fit.