Thingiverse
MagSDHolder by MadVampy
by Thingiverse
Last crawled date: 3 years ago
Needed a SD card holder for my 3D printer and didn't see any that would work for me. I wanted at least a 4 SD card holder and wanted it to be easily removable if I moved my printer. There were a few designs that clipped over the edge of the door opening but would interfere with the door. SO I decided to start from scratch. The holder uses a rare earth magnet and simply sticks to the metal housing of the printer where ever I want to place it, this won't work on your printer if has a plastic, wood, or aluminum frame or housing to it.
I used some of the extra magnets I had from my GoPro Mag Mounthttps://www.thingiverse.com/thing:1949608 that I designed. The link below is the site I got the magnets from but any 15mm x 5mm magnet will work. I used them because I had extras and also being rare earth type they hold very well. I used a dab of silicon in the hole to hold the magnet in place. The slots are also keyed (the 45* angle on the card is on the left) so they are always contact down and label towards you. Hit the LIKE button if you liked the design and feel free to comment also.
Magnets I used: https://www.apexmagnets.com/15mm-diameter-x-5mm-thick-disc
I used some of the extra magnets I had from my GoPro Mag Mounthttps://www.thingiverse.com/thing:1949608 that I designed. The link below is the site I got the magnets from but any 15mm x 5mm magnet will work. I used them because I had extras and also being rare earth type they hold very well. I used a dab of silicon in the hole to hold the magnet in place. The slots are also keyed (the 45* angle on the card is on the left) so they are always contact down and label towards you. Hit the LIKE button if you liked the design and feel free to comment also.
Magnets I used: https://www.apexmagnets.com/15mm-diameter-x-5mm-thick-disc
Similar models
thingiverse
free
SD Card Holder by smontanus
...and organizing the cards but i didn't come across any that would hold the cards in the protective cases so i designed my own.
thingiverse
free
SD Card Holder For Makerbot by datafusions
...dn't want to loose the sd card on my workbench when not is use, so i decided a small and easy card holder would do the trick.
thingiverse
free
Memory Card Holder by BostH
...ly in place.
the carrier has:
seven slots for micro sd cards,
one big slot for up to six sd cards and
three slots for usb sticks.
thingiverse
free
Magnetized Fridge Box
...ably. back includes space for 6 recessed rare earth magnets.
add some extra space (~0.2mm) to comfortably accommodate the magnets
thingiverse
free
Ender 3 SD Card Clip Holder by casualcraig84
...lcraig84
thingiverse
i wanted an sd card holder that would clip on the side so i wouldn't lose it so decided to design this.
thingiverse
free
SD and USB card holder by abarlowe
...39;t use as many sd cards as in other sd card holders on thingiverse and needed two usb holding places so i made this in sketchup
thingiverse
free
Hexigon Desk Organizer With USB and SD-Card slot
...tween so it's not easy to get out. it works for me as i rarely use my extra sd cards, and only made it so it's organized.
thingiverse
free
SD Card Holder Prusa i3 by wjordan819
... tabs to stick it in place.
i used supports from the bed only and did have to file the slot slightly to get the card to slide in.
thingiverse
free
(Anet E10 / CR-10 / CR-10 clone) control box display cover with magnets by MarioMacedo
...really strong as you can see in the video.
i glued the magnets using superglue, paying special attention to the magnets polarity.
thingiverse
free
Brice's Desktop Organizer by neosho3d
...would not fit. also if something did not work i would be able to look at it in my hand and be able to see everything i needed to.
Madvampy
thingiverse
free
Jeep YJ Fuse/Relay Cover by MadVampy
... plastic.
i made this for a friend because her's was missing and they wanted $95 usd just for a used cover! #jeeplife #yjjeep
thingiverse
free
5MM LED Holder for PCB by MadVampy
...r the lead holes in the back of the socket. hope this design is helpful for those that design and or make pcb's for projects.
thingiverse
free
Headset Hanger by Digitalpaul
...headset hanger by digitalpaul thingiverse a fine tune of madvampy#39;s headset hanger. i added rounded fillets to the inner...
thingiverse
free
WedgeBase by MadVampy
...n it 180* and reinsert it.
also i am not responsible for any damage to your electrical circuit or car/ truck electrical systems.
thingiverse
free
T-Handle Knob by MadVampy
...o fit any size you need, i many upload a 1/4", and 3/8" size at another time.
update: i just added a 1/4" version
thingiverse
free
PowerBlock AA by MadVampy
... from any metal it may be attached to. the bolt is a snug fit so there will not be any twisting of it inside the printed plastic.
thingiverse
free
4 Gage Ear Rings (Tube, Coffin, Skull) by MadVampy
...i could get into it.
hope you like them, if you do hit the like button and also hit the make button and share a picture of yours!
thingiverse
free
GoPro Mag Mount by MadVampy
...ets: https://www.apexmagnets.com/15mm-diameter-x-5mm-thick-disc
plasti dip spray: https://plastidip.com/our-products/plasti-dip/
thingiverse
free
RamTray by MadVampy
...lined up pretty good (might have to tweak yours depending on the material you use to print it).
not much more to say on this one.
thingiverse
free
TieWrapBar5 by MadVampy
...shape it makes the inserting of the tywrap easier. also you could pre-install your tywraps before you screwed it to your surface.