Thingiverse
Magpul MIAD/MOE Grip Core by micwilli77
by Thingiverse
Last crawled date: 4 years, 7 months ago
This thing fits inside the grip of Magpul MIAD or MOE hand grip for the AR15. I intend to make other cores that have space for batteries, lube bottle, spare parts or Skittles.
This was my first thing I made by hand. The bottom part was the hardest for me. I literally traced the base on paper, scanned, imported, converted and tweaked it until I got it just right.
I used supports that went behind the long tab otherwise it didn't come out as nice as I wanted. Your settings may be better than mine. I would also recommend printing at 100% infill. Anything lower and the long tabs tends to snap off. I added a small block behind the tab to give it more strength. It has been holding up nicely thus far.
This was my first thing I made by hand. The bottom part was the hardest for me. I literally traced the base on paper, scanned, imported, converted and tweaked it until I got it just right.
I used supports that went behind the long tab otherwise it didn't come out as nice as I wanted. Your settings may be better than mine. I would also recommend printing at 100% infill. Anything lower and the long tabs tends to snap off. I added a small block behind the tab to give it more strength. It has been holding up nicely thus far.