Thingiverse
Magnetic/Suction Cup Breadboard Mount by keyglitch
by Thingiverse
Last crawled date: 4 years, 5 months ago
A magnetic/suction cup mount for 1/2 (half-sized) breadboards. For whiteboards and stranger places.
These attachment methods were tested with this print:
Adams Manufacturing 7000-75-3040 Mini Suction Cup Hook, 3/4-Inch - (The trick to getting these in is turning while pushing the stem in)
Badge Magnets
A STEP file breadboard.step is provided for remixing/modifying/experimenting!
Printing
Some items are optional, but these are necessary for a full print:
bumper-1.stl
bumper-2.stl
breadboard.stl
If a center-only badge magnet was chosen, use this to hold it in:
center-retainer.stl
And for more magnets (if you really need to hold something heavy):
retainer-block2.stl
retainer-block1.stl
To block off any empty slots (so that the adhesive foam pad on most breadboards doesn't collect dust):
slot-cover-tabs.stl
Notes
Adafruit's halfsize breadboard was used as a base for this model's design
These attachment methods were tested with this print:
Adams Manufacturing 7000-75-3040 Mini Suction Cup Hook, 3/4-Inch - (The trick to getting these in is turning while pushing the stem in)
Badge Magnets
A STEP file breadboard.step is provided for remixing/modifying/experimenting!
Printing
Some items are optional, but these are necessary for a full print:
bumper-1.stl
bumper-2.stl
breadboard.stl
If a center-only badge magnet was chosen, use this to hold it in:
center-retainer.stl
And for more magnets (if you really need to hold something heavy):
retainer-block2.stl
retainer-block1.stl
To block off any empty slots (so that the adhesive foam pad on most breadboards doesn't collect dust):
slot-cover-tabs.stl
Notes
Adafruit's halfsize breadboard was used as a base for this model's design