Magnetic 18650 battery holder by Malinka

Last crawled date: 3 years, 5 months ago

This thing is a remix of https://www.thingiverse.com/thing:2668159
Parts needed:
Option 1(Wires hold in place by the screws):
M3x12 x2 (can be longer but not shorter)
M3 Nut x4
M3 washer x4
Neodymium magnets 3x6 x2
Option 2(Wires soldered to the screws):
M3x12 x2 (can be longer but not shorter)
M3 Nut x2
M3 washer x2
Neodymium magnets 3x6 x2
Assembly Instruction(details on pictures):
On each end put one M3 bolt, then one washer and finally one nut. Tighten them firmly.
Press in magnets on each side (use glue if necessary)
If part not moving smooth, add some oil.
WARNING!!!
This model is print in place, DO NOT USE SUPPORTS.