MacPi Mini V2 by The_Craft_Dude

Last crawled date: 3 years ago

(please feel welcome to check out, all of my other designs under my profile :P https://www.thingiverse.com/The_Craft_Dude/designs )
This is a Raspberry Pi case, designed (as close as plausible for me) 1:1 with the mid 2010 Mac Mini.

This case supports the Raspberry Pi 2 + 3

For users of the Raspberry Pi 4, please follow this link, its a remix of my model of from "rkwallace"
https://www.thingiverse.com/thing:3936762
The main difference between v1 and v2 is the added active cooling, with a 40mm fan(max hight is 10mm).
the case is designed to snap together, except for the bottom feet, that might need some glue to hold it in place, but there is a little cut out on the bottom of the bottom "shell" for aligning the part. The case might also support most heatsink, depending on how tall it might be.
The screw holes for the pi is 3.5mm in diameter, and for the fan 4mm (max hight is 6mm for the fan screws).
The foot attaches via 3 lock pins, so no glue or screws should be needed (please refer to pic. no. 3).
(sanding some of the parts might be needed, depending on your printers settings)
if there is any flaws or problems printing this, please let me know ^^