Thingiverse
Macintosh ipad stand
by Thingiverse
Last crawled date: 6 years ago
Ipad mini tablet stand. Not just any stand though. This one is shares it's lines with the iconic Macintosh. You will need a printer with a 300 x 300 mm bed to print it. It's printed in two halves and then they are bonded together with a 2-part resin and clamped until set.
I printed mine with an unheated CR-10S It was a while back though so I cannot remember the exact settings.
Feel free to print yourself one.
The filament I used was EOLAS Beige. It is really nice to print with and is the perfect colour!
The 2 stands i printed were not sanded at all but any protruding resin or plastic was scraped off.
Pair this up with a 60% mechanical bluetooth keyboard and a bluetooth mouse and this is going to look totally awesome.
Share the makes, I'd love to see someone else's out there in the world.
This was made with Inkscape and tinkercad (i am no savvy designer)
I printed mine with an unheated CR-10S It was a while back though so I cannot remember the exact settings.
Feel free to print yourself one.
The filament I used was EOLAS Beige. It is really nice to print with and is the perfect colour!
The 2 stands i printed were not sanded at all but any protruding resin or plastic was scraped off.
Pair this up with a 60% mechanical bluetooth keyboard and a bluetooth mouse and this is going to look totally awesome.
Share the makes, I'd love to see someone else's out there in the world.
This was made with Inkscape and tinkercad (i am no savvy designer)