Thingiverse
M32 MGL Grenade Launcher prop by WillPio
by Thingiverse
Last crawled date: 4 years, 7 months ago
So this model was made by me. This is my second model. What I did was work out the cylinder barrel size and roughly designed the rest of this prop relative to that size. Some sizes will be off, I did modify the look of it a bit. It is ready to have 40 mm dummy grenades fit into it. It is intended to have moving parts.
The grip and picatinny I took off thingiverse just to show an example. Those models are not included in this print.
You will need a spring to put under the topclip (lever)
You will need a bolt and bearing to hold the barrel cylinder.
Some parts need gluing together.
You will need bolts to or pins to secure the hinge system.
I didn't orientate the parts as some of you may like to print the parts in different orientation.
https://www.youtube.com/channel/UCnUgkBmiQfixJcNUzDw5YWAhttps://www.facebook.com/AandPcreative/
The grip and picatinny I took off thingiverse just to show an example. Those models are not included in this print.
You will need a spring to put under the topclip (lever)
You will need a bolt and bearing to hold the barrel cylinder.
Some parts need gluing together.
You will need bolts to or pins to secure the hinge system.
I didn't orientate the parts as some of you may like to print the parts in different orientation.
https://www.youtube.com/channel/UCnUgkBmiQfixJcNUzDw5YWAhttps://www.facebook.com/AandPcreative/