Thingiverse
LulzBot TK-0 3D Printer by LulzBot
by Thingiverse
Last crawled date: 3 years ago
The TK-0 is LulzBot's new printer that is currently under development. You can find photos, source and print files, BOM, and more information at http://devel.lulzbot.com/TK-0/ .
-RepRap 3D Printer, under development.
-300mm x 300mm x 225mm build volume.
-250mm/sec printing speed at 100 microns!.
-Authentic Open Hardware and Free Software, not baitware. In general, design files are under the GPLv3, documentation under CC-BY-SA.
-Code has already been released. Note it is a bit disorganized, but we prefer to release it as is instead of sitting on it. See various directories above. "Release Early and Often!"
-All descriptions and files are subject to change. Probably every single part will be tweaked or wholly changed by final release. --This is an alpha release.
-Designed by Vergent Products. Vergent, as far as we can tell, has built more RepRaps than any other organization (except us, in house, at Aleph Objects, Inc!). They have deep experience in building all sorts of hardware and PCBs. The TK-0 is the result of a decade+ running factories and an obsession with RepRap.
-Vergent's Design for Excellence doc is highly educational.
-Low part count, very low SKU count.
-Only uses 3 different sized bolts (!)
-About 20 printed parts. STLs available, as well as original Sketchup files. We are very interested in having these files redrawn in Free Software, so if you are a FreeCAD or OpenSCAD guru, please contact shop@lulzbot.com.
-RAMBo electronics.
-Panucatt Heatbed. 300mm version under design.
-Folds up into a small box, for easier and less expensive shipping.
-Approximately 11kg including power supply.
-Size of unit: 585mm x 525mm x 525mm.
-Size of unit when folded: 585mm x 525mm x 190mm.
-Enclosed UL certified power supply (will be 24V).
-Budaschnozzle 1.2.
-Wade's Reloaded extruder.
-All extrusion lengths the same--very easily scalable up or down.
-All rod lengths the same.
-All belt lengths the same.
-Colored LEDs to indicate heat and cooling.
-Designed for fast assembly. Can be fully assembled and calibrated in 2.5 hours. Design considerations include "assembly ergonomics" to make sure it is easy on the assembler to build!
-May use borosilicate glass bed (expensive), unless alternative is found. Possibly ceramic plate.
-May include thermal fuse for hot end and heatbed safety.
-All parts should be easily available, with alternate vendors for each SKU.
-80/20 and/or Misumi 20mm T-slot.
Fan to cool heatbed when the print is finished.
-Vertical X.
-Extremely robust. This machine has undergone torture tests running for days on end. You can download the torture test gcode, Zipper.gcode.
-Does not skip steps. Major design consideration.
-Hot end cover/shield with integrated fans. Part not done yet.
-LM8EUU bearings.
-Marlin firmware.
-Pronterface printer control.
-Comes with 0.50mm, 0.35mm, 0.25mm nozzles.
-Designed to have easily replaceable toolheads, such as laser, adhesive applications, light CNC, pick & place, solder paste, glue, selective solder.
-At present swapping out the X carriage only requires removing 4 bolts. It may be designed with quick release.
-Will likely include mechanism for changing out print surface.
-Z/X ends are being redesigned to entirely eliminate wobble. This is under active development. Files pushed when available.
-Can print ABS and PLA. We have an experimental option for printing Polycarbonate ("bullet proof glass"): the Polyschnozzle. See this youtube video.
-Will be 100% RoHS compliant.
-Designed for safety.
-Dual extruder capable. See photos here (http://www.alephobjects.com/photos/extruders/dual/whuf/) and here (http://www.alephobjects.com/photos/plastic/random_objects/2012Q3/dual_whuf/) for examples of running dual extruders on our A0-100. We also sponsor dual support in Slic3r.
-The TK-0 name comes from "Tee kay ooooh!". AKA, technical knock out. :)
-Will work out-of-the-box when shipped to end users. No calibration or monkeying around. --Just like the AO-100. :)
-Will come with a very nice manual, like the AO-100 manual.
-This archive is available via rsync at rsync://rsync.lulzbot.com/devel/lulzbot/TK-0/ Currently 460 megs.
-If you have any questions feel free to contact us at shop@lulzbot.com.
-Oh, and buy stuff at our webstore and we will flourish and continue to release great designs to the public under truly free licenses with no catches whatsoever. We will succeed or go broke, but we will not go proprietary!
-RepRap 3D Printer, under development.
-300mm x 300mm x 225mm build volume.
-250mm/sec printing speed at 100 microns!.
-Authentic Open Hardware and Free Software, not baitware. In general, design files are under the GPLv3, documentation under CC-BY-SA.
-Code has already been released. Note it is a bit disorganized, but we prefer to release it as is instead of sitting on it. See various directories above. "Release Early and Often!"
-All descriptions and files are subject to change. Probably every single part will be tweaked or wholly changed by final release. --This is an alpha release.
-Designed by Vergent Products. Vergent, as far as we can tell, has built more RepRaps than any other organization (except us, in house, at Aleph Objects, Inc!). They have deep experience in building all sorts of hardware and PCBs. The TK-0 is the result of a decade+ running factories and an obsession with RepRap.
-Vergent's Design for Excellence doc is highly educational.
-Low part count, very low SKU count.
-Only uses 3 different sized bolts (!)
-About 20 printed parts. STLs available, as well as original Sketchup files. We are very interested in having these files redrawn in Free Software, so if you are a FreeCAD or OpenSCAD guru, please contact shop@lulzbot.com.
-RAMBo electronics.
-Panucatt Heatbed. 300mm version under design.
-Folds up into a small box, for easier and less expensive shipping.
-Approximately 11kg including power supply.
-Size of unit: 585mm x 525mm x 525mm.
-Size of unit when folded: 585mm x 525mm x 190mm.
-Enclosed UL certified power supply (will be 24V).
-Budaschnozzle 1.2.
-Wade's Reloaded extruder.
-All extrusion lengths the same--very easily scalable up or down.
-All rod lengths the same.
-All belt lengths the same.
-Colored LEDs to indicate heat and cooling.
-Designed for fast assembly. Can be fully assembled and calibrated in 2.5 hours. Design considerations include "assembly ergonomics" to make sure it is easy on the assembler to build!
-May use borosilicate glass bed (expensive), unless alternative is found. Possibly ceramic plate.
-May include thermal fuse for hot end and heatbed safety.
-All parts should be easily available, with alternate vendors for each SKU.
-80/20 and/or Misumi 20mm T-slot.
Fan to cool heatbed when the print is finished.
-Vertical X.
-Extremely robust. This machine has undergone torture tests running for days on end. You can download the torture test gcode, Zipper.gcode.
-Does not skip steps. Major design consideration.
-Hot end cover/shield with integrated fans. Part not done yet.
-LM8EUU bearings.
-Marlin firmware.
-Pronterface printer control.
-Comes with 0.50mm, 0.35mm, 0.25mm nozzles.
-Designed to have easily replaceable toolheads, such as laser, adhesive applications, light CNC, pick & place, solder paste, glue, selective solder.
-At present swapping out the X carriage only requires removing 4 bolts. It may be designed with quick release.
-Will likely include mechanism for changing out print surface.
-Z/X ends are being redesigned to entirely eliminate wobble. This is under active development. Files pushed when available.
-Can print ABS and PLA. We have an experimental option for printing Polycarbonate ("bullet proof glass"): the Polyschnozzle. See this youtube video.
-Will be 100% RoHS compliant.
-Designed for safety.
-Dual extruder capable. See photos here (http://www.alephobjects.com/photos/extruders/dual/whuf/) and here (http://www.alephobjects.com/photos/plastic/random_objects/2012Q3/dual_whuf/) for examples of running dual extruders on our A0-100. We also sponsor dual support in Slic3r.
-The TK-0 name comes from "Tee kay ooooh!". AKA, technical knock out. :)
-Will work out-of-the-box when shipped to end users. No calibration or monkeying around. --Just like the AO-100. :)
-Will come with a very nice manual, like the AO-100 manual.
-This archive is available via rsync at rsync://rsync.lulzbot.com/devel/lulzbot/TK-0/ Currently 460 megs.
-If you have any questions feel free to contact us at shop@lulzbot.com.
-Oh, and buy stuff at our webstore and we will flourish and continue to release great designs to the public under truly free licenses with no catches whatsoever. We will succeed or go broke, but we will not go proprietary!
Similar models
thingiverse
free
Hlidskjalf (Odin's Chair) by Prot0typ1cal
...locks
misumi usa aluminum extrusions
odin, give me the strength to finish this project, because i've already spent my wealth!
thingiverse
free
Nut and bolt (dual extrusion) by elnadav12
...ion) by elnadav12
thingiverse
dual extrusion nut and bolt.
used by lulzbot at ces 2017 :)
lulzbot.com/learn/attribution-ces-2017
thingiverse
free
AO-100 3D Printer by LulzBot
...o-100 is also available, completely assembled and calibrated, at lulzbot.com.
licensing
-parts and files: gplv3
-images: cc by sa
thingiverse
free
Folger Tech 2020 Prusa i3 Dual Extruder X-Carriage by sircrisp
...ttp://folgertech.com/collections/hot-ends/products/0-4mm-nozzle-mk7-mod-extruder-print-head-for-3d-printer-makerbot-mendel-reprap
thingiverse
free
Tazmania 3D Printer by Bobbyofna
...net 32 bit controller
---24v power supply for smoother stepper motor movement
---paneldue 4.3" touchscreen
---reprapfirmware
grabcad
free
Design of a RepRap 3D Printer
...tesian
extruder: wade's geared extruder
hot end: j head
print material: pla
heat bed: no
print volume: 150mm x 190mm x 225mm
thingiverse
free
Feet for PS4 - For Dual and Single extruder 3D printers
...r that choose extruder for each part, choose "arrange models" and finally "merge".
good luck in printing! ;)
thingiverse
free
CTC Bowden Conversion by The_Great_Bigglesworth
...y off of the bed envelope and it needs to be offset by about cm towards the back of the machine. other than that it is a bolt on.
thingiverse
free
E3D V6/Bowden Extruder Bracket for RepRap by Arron_mollet22
...end and the bowden style extruder.
a full instuctable is at:
http://www.instructables.com/id/3d-printer-extruderhot-end-upgrade/
thingiverse
free
RepRap X2V3 by dob71
...tion (experimental);
various new and existent command improvements.
more details here:http://www.okob.net/projects/reprap_x2v3/
Tk
3ddd
free
Siemens TK 76K572
...siemens tk 76k572
3ddd
siemens , кофемашина
встраиваемая кофемашина siemens tk 76k572
turbosquid
$5
TK Lighting Artos
... 3d model tk lighting artos for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1225980)
3ddd
free
Grundig TK 246
...grundig tk 246
3ddd
магнитофон
corona render
max 2012
turbosquid
$7
chandelier TK LIGHTING 92126
...y free 3d model chandelier tk lighting 92126 for download as on turbosquid: 3d models for games, architecture, videos. (1322086)
3d_export
$5
leuchter tk lighting 27514
...leuchter tk lighting 27514
3dexport
turbosquid
$32
P44 TK Moscow Building
...odel p44 tk moscow building for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1159903)
turbosquid
$29
TK Lighting 2175 Techno
...del tk lighting 2175 techno for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1239384)
turbosquid
$15
TKs Sony Ericsson K750i
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
TKs Simple Designer Chair
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$29
TK Lighting goldi kinket 1810
... lighting goldi kinket 1810 for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1240320)
Lulzbot
thingiverse
free
LulzBot Rocktomek by LulzBot
...lulzbot rocktomek by lulzbot
thingiverse
https://download.lulzbot.com/3d_models/rocktomek/
thingiverse
free
THE Lulzbot spool holder
...the lulzbot spool holder
thingiverse
stl and ipt topmount spool holder for lulzbot
thingiverse
free
Lulzbot logo by Halg199703
...lulzbot logo by halg199703
thingiverse
this is the lulzbot logo. i also have a file for dual extruder.
thingiverse
free
LulzBot Bio printer Model
...lulzbot bio printer model
thingiverse
this is a model of the lulzbot bioprinter
thingiverse
free
Lulzbot Taz Enclosure by MrMcGuire
...lulzbot taz enclosure by mrmcguire
thingiverse
parts for an enclosure for lulzbot taz
thingiverse
free
Lulzbot Spool Holder by MAKE
...lulzbot spool holder by make
thingiverse
a spool holder for your lulzbot.
thingiverse
free
Lulzbot mini spool holder by chewie80524
...lulzbot mini spool holder by chewie80524
thingiverse
this part holds the spool on a lulzbot mini. this design came from lulzbot.
thingiverse
free
Lulzbot Claystruder by 102drewt
...r for the lulzbot taz 4. every thing is snap together, and it only requires a threaded rod, a nut to fit it, and a stepper motor.
thingiverse
free
Lulzbot Mini Enclosure brackets by chewie80524
...lulzbot mini enclosure brackets by chewie80524
thingiverse
lulzbot taz/mini enclosure brackets.
thingiverse
free
Lulzbot mini toolbox by nicsna
...t mini using cura scale down to 0.97.
hope you like it and make sure to leave some feedback or suggestions for my next design. :)
0
turbosquid
$12
Calligraphic Digit 0 Number 0
...hic digit 0 number 0 for download as max, obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1389318)
3d_export
$6
set-0
...set-0
3dexport
turbosquid
$6
hedge 0
...yalty free 3d model hedge 0 for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1450353)
turbosquid
$5
Nuber 0
...oyalty free 3d model nuber 0 for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1564674)
turbosquid
$22
0.jpg
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Steam Locomotive Fowler 4F 0-6-0
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
Liquid Number 0
... model liquid number 0 for download as c4d, 3ds, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1689919)
turbosquid
$45
Dragon360_perspShape_tmp.0.jpg
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$8
Rocks Debris 0
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$18
wood-guardrail-fence 0
...wood-guardrail-fence 0
3dexport
wood-guardrail-fence 0<br>3ds max 2015
Printer
archibase_planet
free
Printer
...inter
archibase planet
printer laser printer pc equipment
printer n120614 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Printer
...rchibase planet
laser printer office equipment computer equipment
printer - 3d model (*.gsm+*.3ds) for interior 3d visualization.
turbosquid
$100
Printer
...er
turbosquid
royalty free 3d model printer for download as on turbosquid: 3d models for games, architecture, videos. (1487819)
turbosquid
$3
Printer
...turbosquid
royalty free 3d model printer for download as max on turbosquid: 3d models for games, architecture, videos. (1670230)
turbosquid
$1
printer
...turbosquid
royalty free 3d model printer for download as max on turbosquid: 3d models for games, architecture, videos. (1595546)
turbosquid
$1
printer
...turbosquid
royalty free 3d model printer for download as max on turbosquid: 3d models for games, architecture, videos. (1595105)
turbosquid
$10
Printer
...id
royalty free 3d model printer for download as max and 3dm on turbosquid: 3d models for games, architecture, videos. (1607146)
turbosquid
$7
Printer
...royalty free 3d model printer for download as ma, ma, and obj on turbosquid: 3d models for games, architecture, videos. (1644580)
turbosquid
$30
Printer
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
Printer
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.