Lulzbot Taz 4 or 5 enclosure remix by billyd

Last crawled date: 3 years ago

This thing was inspired by the Lulzbot Taz Enclosure by MrMcGuire. I've attached a dxf file of the panel details of my enclosure make, so you may have them laser cut, or you can use it as a guide to cut them yourself. Please note the dxf file is not optimized to minimize material, you may want to rearrange the drawing to do so. Also I've attached my version of MrMcGuire's corner bracket and L bracket, which had minor issues with the holes and the hole pattern was slightly inconsistent. Also my version of the MrMcGuire enclosure adds a side door. While I have attached the stl files for the corrected corner and L brackets, the rest of the required printed components can be found at MrMcGuires' thing page : http://www.thingiverse.com/thing:675652
If you use the attached dxf file for your panels, be sure to use the attached corrected version of the corner bracket and the L bracket, or you may have alignment issues.
Update 9-18-2015 I have created a removable bed system perfect for using with this enclosure. Check it out! http://www.thingiverse.com/thing:1021403
Update 2-18-2016 I have added the corrected L bracket to the file section. The holes on this part were also slightly skewed and my DXF file uses the corrected hole pattern. If you use the dxf file to make your panels be sure to use my versions of the L bracket and corner bracket on this thing's page.