Lulzbot MOARstruder Mini Mount by mrevans

Last crawled date: 3 years, 1 month ago

*UPDATE
Ok so the good news it that it works! The bad news is that you have to mess with a couple settings.
Under Machine Settings>Z Offset: -.2 (this will help the first layer stick to the bed (also use a gluestick)
Under the expert settings and the Start.GCODE change it to the following:
;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
;Print time: {print_time}
;Filament used: {filament_amount}m {filament_weight}g
;Filament cost: {filament_cost}
;M190 R{print_bed_temperature} ;Uncomment to add your own bed temperature line
;M109 R{print_temperature} ;Uncomment to add your own temperature line
G26 ; clear potential 'probe fail' condition
G21 ; metric values
G90 ; absolute positioning
M82 ; set extruder to absolute mode
M107 ; start with the fan off
G92 E0 ; set extruder position to 0
M140 S{print_bed_temperature}; get bed heating up
G28 ; home all
M109 R170 ; heat up rest of way
G1 Z150 E-30 F75 ; suck up XXmm of filament
G28 X0 Y0 ; home x and y
M109 R170 ; set to probing temp
M204 S300 ; set accel for probing
G29 ; Probe
M204 S2000 ; set accel back to normal
G1 X5 Y15 Z10 F5000 ; get out the way
M400 ; clear buffer
G4 S1 ; pause
M109 R{print_temperature} ; set extruder temp and wait
M190 R{print_bed_temperature}; get bed temping up during first layer
G1 Z2 E0 F75 ; extrude filament back into nozzle
For filament profile settings, All I do is "install" a TAZ 6 with a MOARstruder head and use the settings based on your filament. (Attached is the profile I use for HIPS)ORIGINAL
This is a replacement mount for the Lulzbot Mini so you can use the MOARstruder nozzle (AKA Longblock hot end). It accounts for the extruder height difference and air flow requrements so you don't have to modify the printer firmware settings.
ORIGINAL
You will need to install the heat set tapered metric threads that lulzbot requires with their spare parts.
This is a HYBRID between the Taz6 and Mini extruder mounting brackets.
Original files are located here:http://download.lulzbot.com/Mini/accessories/LulzBot_Mini_Single_Extruder_Tool_Head_v2_1/printed_parts/extruder_mount/
and Here:http://download.lulzbot.com/TAZ/accessories/tool_heads/version_2/MOARstruder/production_parts/printed_parts/extruder_mount/
This is a Remix. It remains untested at this time. I will try to update as needed.