Thingiverse
Lulzbot Mini Enclosure by barty3d
by Thingiverse
Last crawled date: 3 years ago
Trying to print in Bridge Nylon which delaminates awfully on the print bed. This cover will mitigate draughts and I will also try drying filament in the oven prior to printing. Made with Lexan available from Home Depot and Lowes in USA. Other plastics will work but Lexan cuts well with a circular saw - do not try with a plastic cutter, clamp the lexan securely when cutting and DO wear goggles. You need 4 inner and outer corners, and 14 inner and outer edge brackets which fit on the identical front and back covers. Each are 3" deep to clear the traversing print bed and are free standing. Lexan clamps hook under the printer frame to secure the top, left and right covers. Note before deciding where these clamps go make sure you closely watch the print head drive assembly movements especially when it goes through its initial homing routine. You need to keep the back left corner of the top cover clear of clamps especially or you will foul on this assembly. All brackets/clamps secured with #6 x 1/2" self tapping screws.
For the Lexan I got most of the pieces out a 28 x 30 x .093 sheet but for the two top bits I had to buy another smaller sheet . See jpg for how I cut up sheets. Also see http://www.thingiverse.com/thing:1654725 for my later addition of a filament guide that mnimizes gap and hence down draughts from above print head.
For the Lexan I got most of the pieces out a 28 x 30 x .093 sheet but for the two top bits I had to buy another smaller sheet . See jpg for how I cut up sheets. Also see http://www.thingiverse.com/thing:1654725 for my later addition of a filament guide that mnimizes gap and hence down draughts from above print head.
Similar models
thingiverse
free
Brackets for assembling top enclosure for FlashForge Creator by speedy777
...he pieces fit in the pictures.
for details about the front door hinge and knob, go here:http://www.thingiverse.com/thing:731461
thingiverse
free
Dennerle Nano cube corner brackets and plug by leving
...o i created a slim version (less height, 3mm walls).
update 20180312 uploaded a plug and ring, which fits the hole in top glass.
thingiverse
free
4.5g Face Shield Head-Band (my anti covid) by Stroodies
...ges off of a filament bag and you'll have two reasonably clear sheets of plastic to hang from your new face shield headbands.
thingiverse
free
Modular ant formicarium lid by AnnaGerber
... clear plastic from some packaging (cut to size with scissors)
the cover piece is optional and sits on the top to cover the holes
thingiverse
free
Alternative NATO strap casing for Casio W-800H-1 by Lahelohi
...crews. there are holes for the screws.
put the watch band pins in their place with the watch band pin tool.
finish with nato band
thingiverse
free
Super easy Laser cut acrylic box / candle holder / pen holder by alexzogh
...0282591
i don't recommend using the lexan sheets, as lexan / polycarbonate absorbs ir, and gives off a horrible noxious odor.
thingiverse
free
8mm Brackets – DIN and Umbilical cord by NinjaNeil
...brothers printer, but will suit any 8mm shaft application similar i printed 8 of the din rail brackets –...
thingiverse
free
Corner Clamp 0.25 by ejjenkins
...the items i remove two corner clamps, swap out material and put two corners back on. this makes it very fast to change material.
thingiverse
free
D-Bot Inner Corner Brace by Buket0chicken
...eeded.
if you have a suggestion or request (larger bracket, remove a hole, etc) let me know and i'll whip up a quick version.
thingiverse
free
Corner clamp with drill holes by jMen
...rint with 0.3mm layer
the outer part took 1h40 to print with 0.2mm layer
a step file is included if you want to modify the design
Barty3D
thingiverse
free
Hounds of Hell by barty3d
...hounds of hell by barty3d
thingiverse
modeled this in sculptris. fun to do. need to put some support and raft is optional.
thingiverse
free
Dewalt Screwdriver Tidy by barty3d
...3d
thingiverse
store your dewalt dcf682 screwdriver and two batteries in this compact little storage rack that screws onto wall.
thingiverse
free
8 sided die (dice) by barty3d
...d
thingiverse
a quick project in inventor. only bit that was fiddly was the numbers. rotate on printer so #1 is on the bottom.
thingiverse
free
iPad Rest by barty3d
... is within the mars' printing volume. fortunately this model functionality allowed the loss of a % or two in all directions.
thingiverse
free
Griffin by barty3d
... excess resin on my printer. i found the orientation on chitubox shown worked well with not much in the way of supports to trim.
thingiverse
free
Game Dice (Die) by barty3d
...cely in abs and pla. put the "1" face down and you may have to redrill a little to make as crisp as the other 5 sides.
thingiverse
free
Multi-use clamp by barty3d
...ill work for this application but the clamp is likely useful for other clamping needs. works with 8 x 3/8" pan head screws.
thingiverse
free
Pool Vacuum Clip by barty3d
...odel in inventor and then 3d print. this is printed in abs - seems strong enough - we shall see - haven't used in anger yet.
thingiverse
free
10 Sided Dice (Die) by barty3d
...ggest you put the "1" face down when printing. i modeled it a bit too small so probably best to print about 150% size.
thingiverse
free
Coil Springs by barty3d
...lactites on underside of coil. springs are a bit soft - if you print at 80% scale you get a 0.5" dia x 1" long spring.
Lulzbot
thingiverse
free
LulzBot Rocktomek by LulzBot
...lulzbot rocktomek by lulzbot
thingiverse
https://download.lulzbot.com/3d_models/rocktomek/
thingiverse
free
THE Lulzbot spool holder
...the lulzbot spool holder
thingiverse
stl and ipt topmount spool holder for lulzbot
thingiverse
free
Lulzbot logo by Halg199703
...lulzbot logo by halg199703
thingiverse
this is the lulzbot logo. i also have a file for dual extruder.
thingiverse
free
LulzBot Bio printer Model
...lulzbot bio printer model
thingiverse
this is a model of the lulzbot bioprinter
thingiverse
free
Lulzbot Taz Enclosure by MrMcGuire
...lulzbot taz enclosure by mrmcguire
thingiverse
parts for an enclosure for lulzbot taz
thingiverse
free
Lulzbot Spool Holder by MAKE
...lulzbot spool holder by make
thingiverse
a spool holder for your lulzbot.
thingiverse
free
Lulzbot mini spool holder by chewie80524
...lulzbot mini spool holder by chewie80524
thingiverse
this part holds the spool on a lulzbot mini. this design came from lulzbot.
thingiverse
free
Lulzbot Claystruder by 102drewt
...r for the lulzbot taz 4. every thing is snap together, and it only requires a threaded rod, a nut to fit it, and a stepper motor.
thingiverse
free
Lulzbot Mini Enclosure brackets by chewie80524
...lulzbot mini enclosure brackets by chewie80524
thingiverse
lulzbot taz/mini enclosure brackets.
thingiverse
free
Lulzbot mini toolbox by nicsna
...t mini using cura scale down to 0.97.
hope you like it and make sure to leave some feedback or suggestions for my next design. :)
Enclosure
3d_export
free
electrical enclosure
...l enclosure where electrical devices like (relays, contactors, busbars ) are kept in order to protect from hazardous environment.
turbosquid
$100
GPU Enclosure
...yalty free 3d model gpu enclosure for download as obj and stl on turbosquid: 3d models for games, architecture, videos. (1381061)
3d_export
$5
Electrical Enclosure
...ed. also has tower lights attaced on the top.<br>file format that are available:<br>.step<br>.obj<br>.stl
archive3d
free
Enclosure 3D Model
...closure 3d model
archive3d
shower enclosure-acquarius- 3d model for interior 3d visualization.
archive3d
free
Enclosure 3D Model
...enclosure 3d model
archive3d
shower enclosure-omega- 3d model for interior 3d visualization.
archive3d
free
Enclosure 3D Model
...enclosure 3d model
archive3d
shower enclosure-vega - 3d model for interior 3d visualization.
archive3d
free
Enclosure 3D Model
...enclosure 3d model
archive3d
shower enclosure-zenith - 3d model for interior 3d visualization.
turbosquid
$20
shower enclosure
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$14
Dumpster Enclosure
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$25
3d printer enclosure
... model 3d printer enclosure for download as ipt, skp, and fbx on turbosquid: 3d models for games, architecture, videos. (1634310)
Mini
turbosquid
$10
Mini Mini Luceplan
...
royalty free 3d model mini mini luceplan for download as max on turbosquid: 3d models for games, architecture, videos. (1227359)
3d_ocean
$39
Mini Cooper
...mini cooper
3docean
cabrioler cooper mini
mini cooper cabrioler
3d_export
$30
Mini lathe
...mini lathe
3dexport
mini lathe
3d_export
$5
mini mouse
...mini mouse
3dexport
mini mouse
3d_export
$5
mini house
...mini house
3dexport
mini house
3d_export
free
Mini Mecha
...mini mecha
3dexport
concept of mini mecha
3d_ocean
$20
Mini Gun
...mini gun
3docean
gatling gun gun machine gun mini gun weapon
model of a mini gatling gun.
3ddd
free
Herve mini
... кофейный , herve
http://www.mobiliavenanti.it/ru/products/hervè-mini
3d_export
$5
mini wall
...mini wall
3dexport
mini wall for living room
3d_export
$5
mini bank
...mini bank
3dexport
mini bank 3d model