Thingiverse
Lucifer's Pentecostal Coin - 2 Sided Version
by Thingiverse
Last crawled date: 6 years, 2 months ago
This is a 2 sided version of Lucifers Pentecostal Coin from the Netflix series Lucifer.
Original model:
Lucifer's Pentecostal Coin
by joshuarkendrick Mar 4, 2019
I printed this with a 0.2 mm nozzle, and Layer Height of 0.1 mm.
Print speed 30/60 mm/sec.
205c/40c.
Printed vertically with support touching build plate only.
Support roof enabled with 1 mm support interface roof thickness.
Support gap of 0.2 mm.
Takes about 2.5 hours to complete.
This is the only way I could get the text to come out readable, and even at these settings the text is not perfect.
Printed on the Anet E12.
I suggest printing this at a lower speed than I did.
30 mm/sec should reduce ghosting/ringing effect.
Original model:
Lucifer's Pentecostal Coin
by joshuarkendrick Mar 4, 2019
I printed this with a 0.2 mm nozzle, and Layer Height of 0.1 mm.
Print speed 30/60 mm/sec.
205c/40c.
Printed vertically with support touching build plate only.
Support roof enabled with 1 mm support interface roof thickness.
Support gap of 0.2 mm.
Takes about 2.5 hours to complete.
This is the only way I could get the text to come out readable, and even at these settings the text is not perfect.
Printed on the Anet E12.
I suggest printing this at a lower speed than I did.
30 mm/sec should reduce ghosting/ringing effect.