Thingiverse
losi lst rover conversion by sircrashalot
by Thingiverse
Last crawled date: 4 years, 7 months ago
if you want a race truck, this is NOT for you.
i had a good losi lst and wanted to convert it to a fpv rover. nitro motor and associated hardware was removed, gearbox was converted to 1 speed forward only.
motor is a mabuchi 12v 12000rpm with a can size of 35.66x57.2mm . a collet style propeller adaptor was used to hold the gear to motor.
12mm composite tubes where used between shock tower body posts as rails to mount camera and other gear and offer a bit of protection. cam and pan-tilt are fatshark for now, as i had this laying around
work in progress , motor mount and gears have been tested and spacing is good with factory motor mounting holes .
i had a good losi lst and wanted to convert it to a fpv rover. nitro motor and associated hardware was removed, gearbox was converted to 1 speed forward only.
motor is a mabuchi 12v 12000rpm with a can size of 35.66x57.2mm . a collet style propeller adaptor was used to hold the gear to motor.
12mm composite tubes where used between shock tower body posts as rails to mount camera and other gear and offer a bit of protection. cam and pan-tilt are fatshark for now, as i had this laying around
work in progress , motor mount and gears have been tested and spacing is good with factory motor mounting holes .