Thingiverse
LoRa Microchip_RN2483_LoRa_Mote enclosure version 2 by DIY3D
by Thingiverse
Last crawled date: 4 years, 7 months ago
Microchip LoRa Mote version 2
The board has other dimensions, the display has changed from Oled to lcd and the buttons have moved
Enclosure for Microchip RN2483_LoRa_Mote version 2
Print buttons Layer High .10
Turn Top part upside down for smooth surface and print without support
Put 2 buttons in place and melt the top of pins down with a nail.
Test buttons before you glue the top on the bottom
Update new top part with GPIO and ICSP entry
The board has other dimensions, the display has changed from Oled to lcd and the buttons have moved
Enclosure for Microchip RN2483_LoRa_Mote version 2
Print buttons Layer High .10
Turn Top part upside down for smooth surface and print without support
Put 2 buttons in place and melt the top of pins down with a nail.
Test buttons before you glue the top on the bottom
Update new top part with GPIO and ICSP entry