Thingiverse
Longer True-FLEX Featherboard for Hitachi C10RJ (Metabo) by nordlead
by Thingiverse
Last crawled date: 4 years, 7 months ago
This is a quick remix using Meshmixer to extend the board by ~1 inch. This allows the featherboard to come within 1/8" of the blade on my Hitachi C10RJ. Total length is just about 8.33" (211mm)
Also included are large knobs and miter slot runner, taken from the following customizers. Knobs are universal, miter slot runners are for my Hitachi C10RJ. Designed for a 6mm hex head screw/nut combo. I used 40mm length myself, but I believe 35mm will work for a single, and you'd need longer to stack them.
knob - https://www.thingiverse.com/thing:1562501
miter slot - https://www.thingiverse.com/thing:3973092
Also included are large knobs and miter slot runner, taken from the following customizers. Knobs are universal, miter slot runners are for my Hitachi C10RJ. Designed for a 6mm hex head screw/nut combo. I used 40mm length myself, but I believe 35mm will work for a single, and you'd need longer to stack them.
knob - https://www.thingiverse.com/thing:1562501
miter slot - https://www.thingiverse.com/thing:3973092