Thingiverse
Lolin32 Lite case
by Thingiverse
Last crawled date: 6 years, 2 months ago
Case for a Lolin32 Lite board, a small ESP-32 based system. There is room for the board itself and for a LiPo battery, and care is taken to have the antenna on the PCB not having the battery below or above it (because that would deteriorate the signal quality).
There is little or no room for extra components, but if you want to build something that doesn't need external parts (for example a Bluetooth/BLE to WiFi converter) this is a nice case.
If you want to modify the case (for example to add holes, or enlarge it to allow extra electronics to be fitted inside) you may be able to use this link to get the Fusion 360 model: https://a360.co/2pQJ9Xu. Or contact me. The Fusion 360 model also has (minimal) models of the board and the LiPo.
There is little or no room for extra components, but if you want to build something that doesn't need external parts (for example a Bluetooth/BLE to WiFi converter) this is a nice case.
If you want to modify the case (for example to add holes, or enlarge it to allow extra electronics to be fitted inside) you may be able to use this link to get the Fusion 360 model: https://a360.co/2pQJ9Xu. Or contact me. The Fusion 360 model also has (minimal) models of the board and the LiPo.