Thingiverse
LoL OPL Fidget Spinners by DuYa
by Thingiverse
Last crawled date: 4 years, 8 months ago
Fidget spinner featuring logos for 3 of the Oceanic Pro League teams (League of Legends)- Avant Garde, Abyss, and Chiefs eSports Club.
This uses the spinner body by 2ROBOTGUY (https://www.thingiverse.com/thing:1802260) with different finger cap, bearing cap, and logos.
I used 608ZZ shielded bearings (8x22x7mm), and found I needed to scale the spinner body by 1.015.
Everything printed at 0.15mm resolution, 100% infill, with support as needed.
The caps come in 2 variants: one with an 8.0mm shaft, and one with an 8.2mm shaft. 8.0mm should be the same as the inside of bearing, but mine needed to be slightly bigger (poor Chinese bearings possibly).
This uses the spinner body by 2ROBOTGUY (https://www.thingiverse.com/thing:1802260) with different finger cap, bearing cap, and logos.
I used 608ZZ shielded bearings (8x22x7mm), and found I needed to scale the spinner body by 1.015.
Everything printed at 0.15mm resolution, 100% infill, with support as needed.
The caps come in 2 variants: one with an 8.0mm shaft, and one with an 8.2mm shaft. 8.0mm should be the same as the inside of bearing, but mine needed to be slightly bigger (poor Chinese bearings possibly).