Logitech G920/G29 Playseat Challenge Pedal Mount by Ouroboro5

Last crawled date: 3 years, 4 months ago

A "no hardware" mount solution for Logitech G920/G29 pedals. This idea was borne from my frustration with the velcro attachment strap that Playseat used in their design. It is my guess that they wanted a relatively universal fit for pedals so they settled with using velcro. Anyone that has spent any bit of time using this chair knows that the strap will shift after some use and from folding and unfolding.
This model utilizes the remaining hex cap bolts from my Playseat Challenge which makes it a "no hardware" design with the assumption that you kept spare hardware post installation. There are a total of six printed parts. Four latch on to the frame (two per side) and provide connection points for the support bar. The other two pieces are the support bars, which slide into place and secure to base of the pedals with two hex cap bolts, or one per bar. There should be very little play in this design. Everything fits snug and tight with no discernible play.
Please enjoy and do share your makes!