Thingiverse
Logitech G27 pedal to handbrake conversion fitting by Houhry
by Thingiverse
Last crawled date: 4 years, 5 months ago
Convert a pedal to a handbrake/e-brake thing
You can find a youtube video on this.https://www.youtube.com/watch?v=QWc6EbQdUjE
Very good idea especially if you have a spare pedal.
Instead of printing a complete handbrake, this model prints a fitting for a 22-24mm diameter stick.
You can find such a rolling pin in your local Japanese made in China shop for cheap.
If you have STM32 "bluepill", use that with FREEJOY software. It's much better than his arduino code, much easier to use, to setup, it's just too awesome. (if you don't, buy one)https://github.com/FreeJoy-Team/FreeJoy
the two files: one puts the stick in front ("flat_V3"), one on the back of the pedal(reverse).
The "REVERSE" one is more recommended.
Extra tip: to hold the pedal on table, just use some 3m VHB tape. It will never come off, even if you want to :( Clean up the surface first with alcohol that everyone has nowadays.
You can find a youtube video on this.https://www.youtube.com/watch?v=QWc6EbQdUjE
Very good idea especially if you have a spare pedal.
Instead of printing a complete handbrake, this model prints a fitting for a 22-24mm diameter stick.
You can find such a rolling pin in your local Japanese made in China shop for cheap.
If you have STM32 "bluepill", use that with FREEJOY software. It's much better than his arduino code, much easier to use, to setup, it's just too awesome. (if you don't, buy one)https://github.com/FreeJoy-Team/FreeJoy
the two files: one puts the stick in front ("flat_V3"), one on the back of the pedal(reverse).
The "REVERSE" one is more recommended.
Extra tip: to hold the pedal on table, just use some 3m VHB tape. It will never come off, even if you want to :( Clean up the surface first with alcohol that everyone has nowadays.