Thingiverse
Logitech C270 Prusa MK3 / MK3S by CreepShow2600
by Thingiverse
Last crawled date: 4 years, 5 months ago
Remix from: thing:https://www.thingiverse.com/thing:3828249
Slightly longer arm to allow for a C270 with an external lens to clear the print bed. Also closed the holes down to 3mm for use with standard M3 screws. I needed to add a washer to the inside of the camera mount to allow for a tight fit to hold due to the weight of my camera with the external lens.
Slightly longer arm to allow for a C270 with an external lens to clear the print bed. Also closed the holes down to 3mm for use with standard M3 screws. I needed to add a washer to the inside of the camera mount to allow for a tight fit to hold due to the weight of my camera with the external lens.