Thingiverse
Logitec C270 Camera Mount for CTC by mbrownn
by Thingiverse
Last crawled date: 3 years, 1 month ago
Printed this out for my CTC printer so I could mount a Logitec Webcam at eye level.
It is beefy and holds the camera still (no bounce like you might think).
It snaps on snugly on all 3 sides for me. If it is not snug for you, you may want to just run a screw through it. It is low enough to miss the y carriage, but shows the build plate so you can record first layer on down.
It is easier to get it snapped on between screws, then slide it to where you want it.
It is 2.5 inches wide, so you could mount a raspberry pi to the back of it no problem.
I didn't get really fancy with this, it is blocky looking, making it easier to print with a CTC without cooling.
It is beefy and holds the camera still (no bounce like you might think).
It snaps on snugly on all 3 sides for me. If it is not snug for you, you may want to just run a screw through it. It is low enough to miss the y carriage, but shows the build plate so you can record first layer on down.
It is easier to get it snapped on between screws, then slide it to where you want it.
It is 2.5 inches wide, so you could mount a raspberry pi to the back of it no problem.
I didn't get really fancy with this, it is blocky looking, making it easier to print with a CTC without cooling.
Similar models
thingiverse
free
Modular Pi camera mount by stmorgan
...nt2 file is 30.4mm tall, designed to center the lens as close to 15mm up from the bottom as i could. this one is as yet untested.
thingiverse
free
Logitec C910 Mount by EdWorks
... i posted the link for the 720p below. this is a sturdy mount.
logitec c720 mount herehttps://www.thingiverse.com/thing:3139164
thingiverse
free
Raspberry Pi Camera Mount for Pan Tilt thing by LogicalToby
...rce m2 nuts in to the back so it's not just screwing in to the plastic but it isn't really necessary so do what you like.
thingiverse
free
CR10 X-Axis Camera Mount 2 Modular Mounting System by h0bb3
...wider clips that could add more stability if you plan on using long levers. have not printed or tested this one myself though....
thingiverse
free
EKEN H9 Action Camera Mount for 3D printer by Abernus
...have done in the pics you will need to print the following:
1 x case
1 x 18mm bar
1 x 42mm bar
1 x mounting bracket
2 x 3x3 joint
thingiverse
free
Corner Camera Mount System by fedhat
...to print and, depending on your printer's tolerances, you might need to do some sanding to get the ball to fit in the socket.
thingiverse
free
Prusa IKEA enclosure camera mount Logitec 270
...f the print bed .
movable in all axis, slides up and down no screws needed.
use 30% infill and 3 perimeters for solid clamp arms.
thingiverse
free
CTC Camera module mount by memmop
...e to bed height .
prints in one go.
i used a standard ip camera module.
the connector above the camera is for an infra red board.
thingiverse
free
F5 CTC Dual Cooling Duct by F5Designs
... the active duct uses clips but they are screwed down. i wanted to just use sprung snap on fixings. they worked a treat for me.
thingiverse
free
PN Racing MR-2999 motor mount
...seems to have worked well. print upside down (top where the screws mount to the body down). you will have to use longer screws.
Mbrownn
thingiverse
free
Marker Bouy by mbrownn
...to print so you wont need rafts.
also made it taller to make it more visible.
printing a couple, one in black for white cap days.
thingiverse
free
Shotgun Shell Holder by mbrownn
...a. shells in the duck boat without having to dig for them.
just updated, aligned mounting holes and cleaned up the ends a little.
thingiverse
free
Cubical Coat Hanger by mbrownn
...th goose down arctic coat on it with no problems. they each fit full scale on a replicator clone.
printing time - about 15 hours.
thingiverse
free
Olee Sleep bed risers by mbrownn
...id under the bed. this took care of both problems.
if you find this useful, tips are always welcome.
15% infill works just fine.
thingiverse
free
Shotgun Shell Container by mbrownn
... chambered, it will bend your firing pin.
buy some snap caps for that purpose, these are intended to be a novelty container only.
thingiverse
free
Ruger 44/96 stock extension by mbrownn
...lose proximity to the factory plate.
looks like thingiverse cant render the extended stock part, but it is included in the files.
thingiverse
free
Ruger Over/Under scope mount by mbrownn
...4 bottom pieces, and 2 top piece to mount a scope.
cant recall what size screw/nut i designed this around, but it was not metric.
thingiverse
free
Shotgun Magazine Limiter Capsule by mbrownn
...st common shotgun in america, let me know how long your limiter is, and i'll add that one as well as any others you may have.
thingiverse
free
Pill Bottle, configurable, floats, color coded by mbrownn
...ll of water.
i am sure this could have many other uses such as match container, come back and let me know what you use yours for.
Logitec
thingiverse
free
Mendel90 Logitec C170 holder by chka
...mendel90 logitec c170 holder by chka
thingiverse
a smart holder for the logitec c170 on a mendel90
thingiverse
free
Logitec life cam cap by cbazlar
...logitec life cam cap by cbazlar
thingiverse
i create a lifecam cap for logitec. the dimensions need to adjust before the print
thingiverse
free
Logitec Webcam 9000 Tripod Adapter. by araspitfire
...rse
this adapter plate allows the direct mounting of the logitec webcam 9000 to a small tripod simular to the one in the photos.
thingiverse
free
Stand for Logitec webcam by ethanshipulski
... for logitec webcam by ethanshipulski
thingiverse
stand for a logitech c920. requires a (short) 1/4-20 screw to grab the camera.
thingiverse
free
supporto per tastiera Logitec K220 by legno75
...i che alzano la tastiera logitec k220. li ho ridisegnati e stampati. se avete bisogno di questo pezzo di ricambio scaricate pure!
thingiverse
free
Logitec C910 Mount by EdWorks
... i posted the link for the 720p below. this is a sturdy mount.
logitec c720 mount herehttps://www.thingiverse.com/thing:3139164
thingiverse
free
Prusa IKEA enclosure camera mount Logitec 270
...f the print bed .
movable in all axis, slides up and down no screws needed.
use 30% infill and 3 perimeters for solid clamp arms.
thingiverse
free
Streamdeck stand for Logitec G213 by Jakwit
...iverse
i printed this on its side, with support!
link to the fusion 360 file if you want to modify this. https://a360.co/36g1poy
thingiverse
free
3.5"HDD tray for Logitec NAS LSV-MS4T/2CW Server by evanjt
...ingiverse
3.5" hard disk tray for logitec nas lsv-ms4t/2cw nas server. you may update it for other 3.5" hard disk bay.
thingiverse
free
bq Prusa i3 Camera Mount Logitec C270 by Sokailu
...sa i3 camera mount logitec c270 by sokailu
thingiverse
a simple camera mount for logitech c270. just slide it under a bed screw.
C270
turbosquid
$25
Webcam Logitech C270
... model webcam logitech c270 for download as 3ds, obj, and 3dm on turbosquid: 3d models for games, architecture, videos. (1319945)
thingiverse
free
C270 Holder for CRX
...c270 holder for crx
thingiverse
c270 holder crx...
thingiverse
free
C270 beugel by EBTronics
...c270 beugel by ebtronics
thingiverse
corner bracket for c270 webcam in lack enclosure
thingiverse
free
Mini C270 by Sp0nge
...mini c270 by sp0nge
thingiverse
mini logitech c270 case
open and closed.
thingiverse
free
C270 logitech by CerveauChat
...c270 logitech by cerveauchat
thingiverse
support 2020 pour caméra c270 et c170
thingiverse
free
C270 Support
...70 support
thingiverse
c270 support for a 30mm top table. rotating base due to a screw.
materials:
1x m3x12
4x m3x25
3x m3 nuts
thingiverse
free
BW-Bracket-C270 by dmelle
...bw-bracket-c270 by dmelle
thingiverse
bw-bracket-c270
thingiverse
free
C270 FishEye Optic by NedalLive
...c270 fisheye optic by nedallive
thingiverse
stand for fisheye optique c270
thingiverse
free
C270 SMD LED mount
...c270 smd led mount
thingiverse
front mount of leds for logitech c270
thingiverse
free
C270 Logitech Holder by nicoflood
...c270 logitech holder by nicoflood
thingiverse
logitech c270 webcam holder rmx
Ctc
turbosquid
$4
CTC Railroad Telephone
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$7
Onibus Ciferal Padron Briza Volvo B58e CTC Azul
...briza volvo b58e ctc azul for download as blend, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1692482)
3dfindit
free
CTC
...ctc
3dfind.it
catalog: rcm
thingiverse
free
CTC by apone4
...ctc by apone4
thingiverse
modifica per ctc montaggio e3d
thingiverse
free
Filiamenthalter CTC by e2mars
...filiamenthalter ctc by e2mars
thingiverse
filiamenthalter ctc makebot
thingiverse
free
CTC's Feet by zion_taron
...ctc's feet by zion_taron
thingiverse
feet to ctc printers
thingiverse
free
CTC Abdeckung by Einstein77
...ctc abdeckung by einstein77
thingiverse
abdeckung für die hinteren bohrungen im gehäuse des ctc
thingiverse
free
CTC Corner caps by KyoFR
...ctc corner caps by kyofr
thingiverse
corner caps ctc
thingiverse
free
FILAMENT GUIDE CTC by HugoNogier
...filament guide ctc by hugonogier
thingiverse
filament guide ctc
thingiverse
free
CTC Bizer Fusshalter by FPV57
...ctc bizer fusshalter by fpv57
thingiverse
haltewinkel für gummifüsse ctc
Camera
archibase_planet
free
Camera
...base planet
camera surveillance camera video camera
camera surveillance n090211 - 3d model (*.3ds) for interior 3d visualization.
archibase_planet
free
Camera
...hibase planet
camera security camera video camera
camera security n210515 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
archibase_planet
free
Camera
...se planet
camera web camera webcam
camera butterfly usb pc camera n090713 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Camera
...mera
archibase planet
surveillance camera video camera camcorder
camera n011211 - 3d model (*.3ds) for exterior 3d visualization.
archibase_planet
free
Camera
...camera
archibase planet
camera digital camera
camera canon digital n041211 - 3d model (*.3ds) for interior 3d visualization.
archibase_planet
free
Camera
...camera
archibase planet
camera film camera phototechnique
camera n100214 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Camera
...amera
archibase planet
camera video camera camcorder
camera video n070315 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Camera
...rchibase planet
camera video camera camcorder
camera studio n101213 - 3d model (*.gsm+*.3ds+*.max) for interior 3d visualization.
archibase_planet
free
Camera
...ibase planet
digital camera camera phototechnique
camera canon ixus 400 n310311 - 3d model (*.3ds) for interior 3d visualization.
archibase_planet
free
Camera
...ase planet
photocamera video camera camera
camera sony t300 black n291010 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
Mount
3d_export
free
mounting bracket
...mounting plate is the portion of a hinge that attaches to the wood. mounting plates can be used indoors, cabinetry and furniture.
turbosquid
$2
MOUNTING
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Mounts
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Mount Fuji
...fuji
turbosquid
free 3d model mount fuji for download as obj on turbosquid: 3d models for games, architecture, videos. (1579977)
3d_export
$5
Headphone mount LR
...headphone mount lr
3dexport
headphone mount l+r
turbosquid
$39
Mount rainier
...quid
royalty free 3d model mount rainier for download as fbx on turbosquid: 3d models for games, architecture, videos. (1492586)
turbosquid
$5
pipe mounting
...quid
royalty free 3d model pipe mounting for download as obj on turbosquid: 3d models for games, architecture, videos. (1293744)
turbosquid
$3
Mounting Tires
...uid
royalty free 3d model mounting tires for download as fbx on turbosquid: 3d models for games, architecture, videos. (1708511)
3d_export
$5
Magnetic GoPro Mount
...pro mount
3dexport
cool magnetic mount for gopro. allows you to mount the camera on flat metal surfaces and get exclusive shots.
turbosquid
$5
Stone Mount
...ty free 3d model stone mount for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1370306)