Thingiverse
Logan's Run Sleep Gun (Remix) by rkxone
by Thingiverse
Last crawled date: 3 years, 4 months ago
I finally decided I was going to print out a Logan's run Sleep gun :) And again I saw the opportunity to help make it an easier print and fix some minor issues, so here are my mods. I have completed assembly and everything works so this addresses some of my main wants for this awesome model.
I am also going to include the full parts kit here (the originals I used also), so everything you need is in this one thing saving any confusion hopefully.
Okay, so on to the mods
What I wanted to address:
The back barrel cap: the back barrel is threaded but the back cap is not, I have put threads on the back cap now, they are not large, but once you work them in it threads on like a nice tight glove (tip a little force is required here).
The front barrel: Just looking at this made my head hurt in the slicer, so much extra supports, and difficult areas to work with for the supports, so I took it apart, I created a core for the back, I know this takes away from the stop point for the main barrel but that is easily to work around without much effort. so I created an insert for the back that still allows LED electronics to but put in. and I also made the insert multipart to make printing easy without support. The front of the barrel is also multipart, this allows the front barrel to be printed level on the bed with only supports needed for the wedge (I am testing this support setup now to make sure the tops of the inset cut outs work without too much issue with no support)) this also allows the new front cap bevel to be added and removed for access or modification
Other greebles: I will also be making a base for this shortly for display.
The New Parts:
New Back Cap Threaded
This mod puts the threads on the back cap for attachment to the back barrel
used the existing back barrel dropped the XY 2mm to make the new threads with
clearance
This still needs a bit of force to get on, but once set it works beautifully and tight allowing proper access to everything so I am not going to mess with it more right now.
this isn't meant to be perfect it's just meant to work better :)
New front barrel (Inserts, main front barrel and front barrel front)
To make the front barrel an easier print I have split the front barrel into several parts and incorporated a few different elements, I pulled out the inner back section to allow a flat print, this section is now 2 pieces, an inner tube and an outer insert shell to be combined and slid into the main barrel section after print completion, then the front barrel goes around it all
the front tip has been divided to allow the new front end cap to be a one piece addon, the means the front barrel now prints much easier, with just support for the fin (I had not issues printing it this way so I didn't want to really over complicate it)
Screws
Added some Philips head screw blanks for the handle (there will be sanding involved dur to the nature of these) Should be enough and varied enough to fill all the spots how you see fit.
Front Barrel Main
The back of this barrel was cut down 2mm to make a solid smooth top layer then stretched to put more on the main barrel for gluing
build plate support only (fully tested as clean and nice) the part comes out strong but due to the nature of the venting it's not going to be super strong (Nature of the beast)
Front Barrel Adapter
I did not want to redesign the hole main and back barrels so this little spacer goes over the main barrel and then inside the front main barrel, needs a tad sanding for elephants foot but other than that its fits nice and tight.
Front Barrel Cap
This cap just slides into the front and includes the new front profile to match the movie prop
some minor sanding will be needed for a tight fit (this is by design to allow other modifications or disassembly)
I may add a thinner variant here later I will see once I have it all glued up
Front Barrel back inserts
Broken down into 2 parts
the inner cylinder slides into the main insert from the contoured side (judge it how you best want it to look, I put mine flush to the elephant foot :P )
Insert the new 2 piece part into the main barrel, contour side in (fit perfectly)
The fit is best to be able to work on this part for any electronics at a later time depending how you put your gun together, glue any LED to the front rim and run the wires through
Attach the front barrel to the main barrel assembly AFTER installing the insert!! :P
Screw set
Added more rounded screws
Added inset crosses (print as orientated)
As per this type of part there will be a need for much sanding depending how your print came out
Hopefully you found this mod helpful :) Enjoy! If you enjoy my prints please consider donating, even a dollar helps :) it's always appreciated :) https://www.paypal.me/RychardK
I am also going to include the full parts kit here (the originals I used also), so everything you need is in this one thing saving any confusion hopefully.
Okay, so on to the mods
What I wanted to address:
The back barrel cap: the back barrel is threaded but the back cap is not, I have put threads on the back cap now, they are not large, but once you work them in it threads on like a nice tight glove (tip a little force is required here).
The front barrel: Just looking at this made my head hurt in the slicer, so much extra supports, and difficult areas to work with for the supports, so I took it apart, I created a core for the back, I know this takes away from the stop point for the main barrel but that is easily to work around without much effort. so I created an insert for the back that still allows LED electronics to but put in. and I also made the insert multipart to make printing easy without support. The front of the barrel is also multipart, this allows the front barrel to be printed level on the bed with only supports needed for the wedge (I am testing this support setup now to make sure the tops of the inset cut outs work without too much issue with no support)) this also allows the new front cap bevel to be added and removed for access or modification
Other greebles: I will also be making a base for this shortly for display.
The New Parts:
New Back Cap Threaded
This mod puts the threads on the back cap for attachment to the back barrel
used the existing back barrel dropped the XY 2mm to make the new threads with
clearance
This still needs a bit of force to get on, but once set it works beautifully and tight allowing proper access to everything so I am not going to mess with it more right now.
this isn't meant to be perfect it's just meant to work better :)
New front barrel (Inserts, main front barrel and front barrel front)
To make the front barrel an easier print I have split the front barrel into several parts and incorporated a few different elements, I pulled out the inner back section to allow a flat print, this section is now 2 pieces, an inner tube and an outer insert shell to be combined and slid into the main barrel section after print completion, then the front barrel goes around it all
the front tip has been divided to allow the new front end cap to be a one piece addon, the means the front barrel now prints much easier, with just support for the fin (I had not issues printing it this way so I didn't want to really over complicate it)
Screws
Added some Philips head screw blanks for the handle (there will be sanding involved dur to the nature of these) Should be enough and varied enough to fill all the spots how you see fit.
Front Barrel Main
The back of this barrel was cut down 2mm to make a solid smooth top layer then stretched to put more on the main barrel for gluing
build plate support only (fully tested as clean and nice) the part comes out strong but due to the nature of the venting it's not going to be super strong (Nature of the beast)
Front Barrel Adapter
I did not want to redesign the hole main and back barrels so this little spacer goes over the main barrel and then inside the front main barrel, needs a tad sanding for elephants foot but other than that its fits nice and tight.
Front Barrel Cap
This cap just slides into the front and includes the new front profile to match the movie prop
some minor sanding will be needed for a tight fit (this is by design to allow other modifications or disassembly)
I may add a thinner variant here later I will see once I have it all glued up
Front Barrel back inserts
Broken down into 2 parts
the inner cylinder slides into the main insert from the contoured side (judge it how you best want it to look, I put mine flush to the elephant foot :P )
Insert the new 2 piece part into the main barrel, contour side in (fit perfectly)
The fit is best to be able to work on this part for any electronics at a later time depending how you put your gun together, glue any LED to the front rim and run the wires through
Attach the front barrel to the main barrel assembly AFTER installing the insert!! :P
Screw set
Added more rounded screws
Added inset crosses (print as orientated)
As per this type of part there will be a need for much sanding depending how your print came out
Hopefully you found this mod helpful :) Enjoy! If you enjoy my prints please consider donating, even a dollar helps :) it's always appreciated :) https://www.paypal.me/RychardK
Similar models
thingiverse
free
SDS-plus cap V2
...ails like in original sds-plus so now it is much easier to insert your tool properly.
print it in spiral vase mode
happy printing
thingiverse
free
Vacuum Hose Pivoting Adapter by ksuszka
...ched openscad file and modify the part diameter by yourself.
acknowledgments
i used the excellent thread library by dan kirshner.
thingiverse
free
Micro Cannon by Motley74
...rint only a single piece if needed. i have printed everything but have not been able to test fire it so any feedback is welcome.
thingiverse
free
Bottle Cap Gun by ThunderClan
...de part
use paraffin wax or grease in the grooves of the top slide and also in the cap barrel. makes the movement buttery smooth.
thingiverse
free
Lost in Space Laser Pistol by JokerToolWorks
...the faux led lights from the back of the receiver because they aren't present on the more recognizable season 2 laser pistol.
thingiverse
free
PBS-4 Silencer
... won't cut it outdoor). i would recommend abs or poly-carbonate if you can print those. asa may be a good alternative if not.
thingiverse
free
Bottle Cap Gun Remix
...art
one last tip: use paraffin wax in the grooves of the top slide and also in the cap barrel. makes the movement buttery smooth.
thingiverse
free
Nerf Doublestrike FAT barrel mod by Masky
...fit, no glue needed but feel free to attach it how ever you want.
scratching it makes it look nicer, files work amazing for that.
thingiverse
free
Nerf Hotshock plunger tube to brass adaptor by scruffy_wizard
...rengththeir is a alignment tab inside the plunger tube cap for the dart post that you will need to remove to make the adaptor fit
thingiverse
free
Antenna mount cap (SO-239) by NitzscheModellbau
...you can slightly warm up the so-239 socket with a heat gun (not to hot !) and screw the cap on back and forth to make it perfect.
Rkxone
thingiverse
free
Militech by rkxone
...militech by rkxone
thingiverse
militech sign
for more of my wall art: https://www.thingiverse.com/rkxone/collections/wall-art
thingiverse
free
Avengers Bookmark by rkxone
...kxone
thingiverse
avengers bookmark
check out my other bookmarks here: https://www.thingiverse.com/rkxone/collections/bookmarks
thingiverse
free
Atari Bookmark by rkxone
...y rkxone
thingiverse
atari bookmark
check out my other bookmarks here: https://www.thingiverse.com/rkxone/collections/bookmarks
thingiverse
free
Viper Bookmark by rkxone
...y rkxone
thingiverse
viper bookmark
check out my other bookmarks here: https://www.thingiverse.com/rkxone/collections/bookmarks
thingiverse
free
Ghostbusters Bookmark by rkxone
...e
thingiverse
ghostbusters bookmark
check out my other bookmarks here: https://www.thingiverse.com/rkxone/collections/bookmarks
thingiverse
free
Punisher Bookmark by rkxone
...kxone
thingiverse
punisher bookmark
check out my other bookmarks here: https://www.thingiverse.com/rkxone/collections/bookmarks
thingiverse
free
Shadowrun Bookmark by rkxone
...kxone
thingiverse
shadowrun bookmark
check out my other bookmarks here: https://www.thingiverse.com/rkxone/collections/bookmarks
thingiverse
free
Shadowhunter Bookmark by rkxone
...e
thingiverse
shadowhunter bookmark
check out my other bookmarks here: https://www.thingiverse.com/rkxone/collections/bookmarks
thingiverse
free
Stormtrooper Bookmark by rkxone
...e
thingiverse
stormtrooper bookmark
check out my other bookmarks here: https://www.thingiverse.com/rkxone/collections/bookmarks
thingiverse
free
Biotechnica Sign by rkxone
...hingiverse
biotechnica sign from cyberpunk 2077
for more of my wall art: https://www.thingiverse.com/rkxone/collections/wall-art
Logan
turbosquid
$20
logan
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Martin Logan Theos
...martin logan theos
3ddd
колонки
martin logan theos
3d_export
$15
Logan 3D Model
...logan 3d model
3dexport
logan wolverine marvel x-men xmen men man male detailed realistic
logan 3d model switch3d 56867 3dexport
turbosquid
$99
Dacia Logan
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Logan Кровать 7410
... logan
название "cattelan italia logan кровать 7410"
размеры:
ширина 178 см,
глубина 251 см,
высота 70 см
3d_export
$25
Dacia Logan 2004
...dacia logan 2004
3dexport
3d model dacia logan 2004 file. max2016 - fbx - obj polys. 39 104 verts. 36 046
3d_ocean
$89
Renault Dacia Logan 2010
...oduces ‘new logan’. the latest version of this celebrated three-volume saloon builds on the same strengths that forged the suc...
turbosquid
$39
Dacia Logan wheel
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$29
Renault Logan rim
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$29
Dacia Logan rim
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Sleep
3ddd
$1
Sleeping... :)
...sleeping... :)
3ddd
статуэтка
decoration
3ddd
free
SLEEPING CAR
...sleeping car
3ddd
de padova
производитель: de padova
модель: sleeping car
3ddd
$1
Кровать Sleeping Muse
...3ddd
ceccotticollezioni , sleeping muse
кровать sleeping muse фабрики сeccotticollezioni
3d_ocean
$15
Headphones for sleeping
...adphones. model is separated on parts and correctly named. so it is easy to use and modified.model was made a test render, i h...
turbosquid
$3
Sleep line
...ty free 3d model sleep line for download as max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1644720)
3ddd
$1
Soft line - Sleep
...soft line - sleep
3ddd
soft line
soft line - sleep sofa
lowpoly model for turbosmooth
fbx + obj
turbosquid
$25
Sleeping Gandhi
...ma, 3ds, dxf, obj, wrl, c4d, fbx, blend, lxo, dae, stl, and u on turbosquid: 3d models for games, architecture, videos. (1444026)
turbosquid
$6
Sleeping Lamps Concept
...alty free 3d model sleeping lamps concept for download as obj on turbosquid: 3d models for games, architecture, videos. (1464772)
turbosquid
$5
Sleeping Group Venice
...ping group venice for download as 3ds, max, obj, fbx, and dae on turbosquid: 3d models for games, architecture, videos. (1215505)
3ddd
$1
Кровать Метрополь фабрики Эстетика (sleep&sleep)
...ножьем. фабрики эстетика. референс прилагаю.
ссылка на официальный сайтhttp://sleepeesleep.ru/catalog/beds/metropol.php
Run
turbosquid
$2
Run
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
design_connected
$20
Run Personal
...run personal
designconnected
technogym run personal computer generated 3d model. designed by citterio, antonio.
turbosquid
$49
Elf running
...osquid
royalty free 3d model elf running for download as fbx on turbosquid: 3d models for games, architecture, videos. (1500360)
turbosquid
$20
running machine
...id
royalty free 3d model running machine for download as fbx on turbosquid: 3d models for games, architecture, videos. (1207171)
turbosquid
$4
Zombie Running
...uid
royalty free 3d model zombie running for download as obj on turbosquid: 3d models for games, architecture, videos. (1241889)
turbosquid
$40
Fox, Running
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
Soldier run
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$12
Running Man
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$2
Skeleton Running
...eleton running for download as blend, fbx, obj, gltf, and dae on turbosquid: 3d models for games, architecture, videos. (1589546)
3d_ocean
$19
Running shoes
...imated .textures and materials are included in (others jpg file) the snapshots was rendered using the vray version of the file...
Gun
archibase_planet
free
Gun
...t
gun tommy gun thompson gun thompson submachine gun
gun thompson n120313 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Gun
...gun
archibase planet
gun machine-gun submachine gun
gun m4a1 n260713 - 3d model (*.gsm+*.3ds+*.max) for 3d visualization.
archibase_planet
free
Gun
...base planet
gun submachine gun sub-machine-gun
gun fn scar mark16 n091210 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Gun
...gun
archibase planet
gun rifle hand-gun
gun n221010 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Gun
...gun
archibase planet
gun automatic machine machine gun
gun p90 n020515 - 3d model (*.gsm+*.3ds+*.max) for 3d visualization.
archibase_planet
free
Gun
...gun
archibase planet
gun automatic rifle submachine-gun
gun m4 n221112 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Gun
...gun
archibase planet
gun m16 machine gun
gun m16 n030613 - 3d model (*.gsm+*.3ds+*.max) for interior 3d visualization.
archibase_planet
free
Gun
...gun
archibase planet
machine-gun gun fire-arms shooter
gun n270211 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Gun
...hibase planet
gun automatic machine machine gun
gun jackhammer mk3a1 n290415 - 3d model (*.gsm+*.3ds+*.max) for 3d visualization.
archibase_planet
free
Gun
...n
archibase planet
paintball gun gun paintball
gun paintball bt 4 renta n280611 - 3d model (*.3ds) for interior 3d visualization.
Remix
turbosquid
$5
MODA Collection Remix Chair
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$12
remix yamaha rm1x
...remix yamaha rm1x
3dexport
geometry triangles 15.2k vertices 7.6k pbr no textures 1 materials 1 uv layers yes
3d_ocean
$5
Vray fabric Kvadrat remix green - tileable
...th vray and 3dsmax. high-resolution texture images (2000×2000 px) file included: shader vray 2.40 texture image 3ds max 2011 file
turbosquid
$20
Gerrit Rietveld 1938 Zig Zag Chair Remix
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$10
multicolored remix parametric table furniture
... fbx, obj, mtl, archive with textures. the model has no glitches. render and materials - vray . without using plugins. good use!
3ddd
$1
Barovier&Toso / Manhattan Remix 7192
... 004293-142405
в коллекции есть люстры 7, 9, 12 рожковые. диаметр соответственный 1000, 1250, 1500 мм.
3ddd
$1
Muuto fiber chair
...grey/grey, dusty green/dusty green, nature/oak, natural white/oak upholstery options remix 183/black, remix 133/grey, remix 643/dusty red leather options black...
3ddd
$1
Barovier&Toso 7190-7195
...7190-7195 3ddd barovier&toso потолочнай люстра фабрики barovier&toso;, коллекция manhattan remix артикул 7190-7195. размеры в inches: 39"...
3d_export
$5
3D Locking Handle Weatherproof Storage Box Container
...handle weatherproof storage box container 3dexport new, improved and remixd! no screws required. print-in-place. weatherproof. parametric. 2 parts. easy...
cg_studio
$49
HTC One Mini 2 Amber Gold3d model
...cell phone mobile cellular super lcd touchscreen touch screen remix amber gold .max .obj .mb .lwo .fbx .c4d .3ds...