Lobster Boat | 3D

Last crawled date: 2 years ago

This is a 61cm or 2 feet long 3d model of a customizable lobster boat(customized for 3d printing). This contains only .stl file. So. you can 3d print the boat and use it in your RC projects. This boat has a total of 10 3d printable parts. 4 parts for the hull and four for the bridge. And remaining two parts are the rudder and rudder shaft. The maximum height of any part is less than 25cm. So, if you have a 3d printer that can print a maximum of 25cm on the Z axis, there will be no problem. I said that it is a customizable boat because it has no fixed position for batteries, servos, and other electronics. you can put them wherever you want and make a perfect balance. So, you can use any motor, servo, or battery that fits on the boat. The turbine shaft diameter is 3.2mm and the rudder shaft diameter is 2.2mm.