Thingiverse

Loaf Slicing Guide
by Thingiverse
Last crawled date: 5 years, 7 months ago
Most of the 3D printed loaf guides are for multiple slices and tend to be a bit weak. We only ever cut one or two slices at a time so I designed a sturdier model. Slice is 14mm thick.
The two sides are printed flat on the bed to give strength in the correct direction. The sides dovetail into the base. The tolerance on the dovetails works perfectly for PETg with 0.2mm layer height, extruder 250C and bed 90C.
The two sides are printed flat on the bed to give strength in the correct direction. The sides dovetail into the base. The tolerance on the dovetails works perfectly for PETg with 0.2mm layer height, extruder 250C and bed 90C.