Thingiverse
Lizardman 52mm by GameScape3D
by Thingiverse
Last crawled date: 4 years, 3 months ago
A good reason to stay out of swamps. 52mm version
https://gamescape3d.com
ASSEMBLY REQUIRED:Will likely require xacto blade, or sanding, and superglue to assemble weapons/shields to figure. We advise the following settings for slicing
Layer height: Between .2mm
auto_support: Between 1- 1.5mm
Fill Density: 20% or greater
3 shells
Many free designs available at
https://gamescape3d.com
ASSEMBLY REQUIRED:Will likely require xacto blade, or sanding, and superglue to assemble weapons/shields to figure. We advise the following settings for slicing
Layer height: Between .2mm
auto_support: Between 1- 1.5mm
Fill Density: 20% or greater
3 shells
Many free designs available at