Little airplane model by Kuuczoo

Last crawled date: 4 years ago

Little airplane on a shelf.
Instruction:
Print everything.
Glue the frame (1x, except piece "I"). Inner reinforcements are numbered (from motor side).
Glue upper wing reinforcement, and then whole wing (2) to the frame.
Glue two pieces of horizontal stabilizer (3A) together. Glue vertical stabilizer (3B) to the frame and horizontal stab. to vertical stab.
Glue two pieces of tail wheel (3C) together and then whole wheel to last frame reinforcement.
Stick trimmed pins into the main wheels (5B) and then glue protruding piece of pins to main landing gear (1/2 5A) (leave enough space so that the wheel can rotate).
Glue whole landing gear to the frame.
Stick trimmed pin into the hood (4B) and then glue the propeler (4C) to pin.
Glue the hood whith propeler to reinforcement number "I" (to the flat side).
Glue two pieces of motor (4A) together and then glue motor to reinforcement number "I".
Glue whole module to the frame.
(Sorry for my english. I hope everybody understand everything.)