Thingiverse
Linealanschlag - Rulerstop
by Thingiverse
Last crawled date: 4 years, 3 months ago
Edit: Some people had issues, printing the trapezoid threads, added a version with regular M14x2 threads.
Just in case, one might think, that does not work.... ;)https://www.youtube.com/watch?v=DNR58DfmLSM
Does, what it looks like.... for Ruler 30 * 1.0 mm.
The printing of that part in order to produce working threads was challenging.
Important:
IN ORDER TO PRINT THE THREADS, YOUR PRINTER MUST BE CALIBRATED REALLY GOOD !!! Accept the challenge! ;) it is worth the effort, after that, your printer works dimensionally accurate.
My calibration sequence (sequence is impotant) is:
-Take care, that your printer stands on level subsurface
-Take care, that the ground/subsurface does not shake, while printing
-Take care, that the printer is built and alligned exactly
-PID tuning http://marlinfw.org/docs/gcode/M303.html
-optimally levelled bed, at least, first layer without elephant foot.
-calibration of extruder steps and correction in firmware or start GCode
-measurement of average filament diameter (edit in slicer).
-calibration of extrusion multiplier (edit in slicer) https://www.thingiverse.com/thing:1796601
-calibration of x/y steps and correction in firmware or start GCode https://www.thingiverse.com/thing:2484766 http://marlinfw.org/docs/gcode/M092.html
-calibration of z steps and correction in firmware or start GCode https://www.thingiverse.com/thing:2484766 http://marlinfw.org/docs/gcode/M092.html
-Print a Temp Tower to find a suitable temperature for your Filament and edit your slicer https://www.thingiverse.com/thing:2493504
Just in case, one might think, that does not work.... ;)https://www.youtube.com/watch?v=DNR58DfmLSM
Does, what it looks like.... for Ruler 30 * 1.0 mm.
The printing of that part in order to produce working threads was challenging.
Important:
IN ORDER TO PRINT THE THREADS, YOUR PRINTER MUST BE CALIBRATED REALLY GOOD !!! Accept the challenge! ;) it is worth the effort, after that, your printer works dimensionally accurate.
My calibration sequence (sequence is impotant) is:
-Take care, that your printer stands on level subsurface
-Take care, that the ground/subsurface does not shake, while printing
-Take care, that the printer is built and alligned exactly
-PID tuning http://marlinfw.org/docs/gcode/M303.html
-optimally levelled bed, at least, first layer without elephant foot.
-calibration of extruder steps and correction in firmware or start GCode
-measurement of average filament diameter (edit in slicer).
-calibration of extrusion multiplier (edit in slicer) https://www.thingiverse.com/thing:1796601
-calibration of x/y steps and correction in firmware or start GCode https://www.thingiverse.com/thing:2484766 http://marlinfw.org/docs/gcode/M092.html
-calibration of z steps and correction in firmware or start GCode https://www.thingiverse.com/thing:2484766 http://marlinfw.org/docs/gcode/M092.html
-Print a Temp Tower to find a suitable temperature for your Filament and edit your slicer https://www.thingiverse.com/thing:2493504
Similar models
thingiverse
free
Artillery Sidewinder X1 - Nut 6 Extruder Step Calibration Tool V3
...nd caliper.
you can use it, without changing filament, in my case the spool was at it's end....
https://youtu.be/nfts8omndnm
thingiverse
free
Skew calibration by Order_3D
...infw.org/docs/gcode/m852.html
https://www.youtube.com/watch?v=yfab5iahdso
in marlin configuration.h - bed skew compensation topic
thingiverse
free
Kossel / Delta Dimensional Calibration with Instructions by Coffea
...s created a remix of this with accompanying spreadsheet to calibrate cartesian printers https://www.thingiverse.com/thing:2390274
thingiverse
free
20mm XYZ Axis Calibration Cube for 3D printers (minimal xyz) by Skipper93
...ented xyz letters.
after the print check and calibrate your printer setup with help of ;https://www.thingiverse.com/thing:1278865
thingiverse
free
Anycubic Delta BLTouch Mount (Snap In) by laup_x
...to prime the extruder.
fusion 360 link: http://a360.co/2j6zugu
video of it in action: https://photos.app.goo.gl/bmunzgjz7z6id0no2
thingiverse
free
Finding the center - Setting an offset in the Start-Gcode by JonasGER
...hould now be in the center directly over your markings.
please give this project a like to show me that you liked it and comment.
thingiverse
free
BLtouch mount for Raise3D N2/N2+ by sylus
...org/docs/gcode/g029-mbl.html
z offset to set with you current setup could be set by a script on start gcode as :
m851 z-x.xx
m500
thingiverse
free
Anycubic Kossel and Kossel Plus Stock Firmware by 3d4uandme
...?id=158
update 2018: anycubic now provide firmware (including autolevel) here:http://www.anycubic3d.com/support/show/594034.html
thingiverse
free
Wall Calibration Test Object by zumili
... can be sliced by your slicer and if it can be printed with your printer.
the wall sizes go from 0.1mm to 1.55mm in 0.05mm steps.
thingiverse
free
Cartesian Dimensional Calibration with Instructions and Excel-Calculator by educa_thor
...out the great instruction given in the original.
turns out, the given formula doesn't work for cartesian printers (xyz-axis).
Linealanschlag
thingiverse
free
ruler stop / Linealanschlag by pccrusher
...4mm breite. schraube zum drucken um 180° drehen
for steel ruler with the measure 0,9mm x 25,4mm.
turn the screw by 180° to print.
thingiverse
free
ruler stop for small steelruler/ Linealanschlag für schmales Stahllineal by pccrusher
...p for small steelruler/ linealanschlag für schmales stahllineal by pccrusher
thingiverse
lineal anschlag für schmale stahllieale
thingiverse
free
Ruler stop for steel ruler / Linealanschlag für Stahlmaßstab (25mm) by Fresh
...can glue it in place with epoxy or fix it with a nut.
also i add another version of the ruler stop. now you can insert an m5 nut.