Thingiverse
Lime SDR USB case with fan by dohertk
by Thingiverse
Last crawled date: 4 years, 5 months ago
Case with fan for socket version of Lime SDR with USB interface
Fan is one of those recommended by SDR designers: DigiKey 259-1565-ND. Will need to add a connector to the fan cable - body is DigiKey H2179-ND, contacts H9992CT-ND. Wire was a bit large to fit in the connector body, so I used a drop of epoxy as a strain relief.
I used half inch flat head screws to hold the fan in the case, and 7/8" screws to fasten the top and bottom. I screwed them right into the plastic (works OK if you don't over-tighten).
Fan is one of those recommended by SDR designers: DigiKey 259-1565-ND. Will need to add a connector to the fan cable - body is DigiKey H2179-ND, contacts H9992CT-ND. Wire was a bit large to fit in the connector body, so I used a drop of epoxy as a strain relief.
I used half inch flat head screws to hold the fan in the case, and 7/8" screws to fasten the top and bottom. I screwed them right into the plastic (works OK if you don't over-tighten).