Thingiverse
Light prop guards for #NanoLongRange by aigilea
by Thingiverse
Last crawled date: 4 years, 7 months ago
Just 2 grams apiece.
Print configuration is 2+2+2+25% infill, may be printed as-is (more supports but easier to remove) or upside down (less supports but harder to remove).
Extremely strong layer adhesion is required so they should be printed with CF Nylon or PETG.
CF Nylon parts may survive serious bumps like flying in the tree.
PETG parts are about 0.1g heavier and considerably softer but they are still fine for accidental wall rubs and small bumps indoors.
Print configuration is 2+2+2+25% infill, may be printed as-is (more supports but easier to remove) or upside down (less supports but harder to remove).
Extremely strong layer adhesion is required so they should be printed with CF Nylon or PETG.
CF Nylon parts may survive serious bumps like flying in the tree.
PETG parts are about 0.1g heavier and considerably softer but they are still fine for accidental wall rubs and small bumps indoors.