Thingiverse
Light hood and arm for 12mm camera rig by fridaysun
by Thingiverse
Last crawled date: 4 years, 2 months ago
Light hood and arm for 12mm camera rig.
need extra parts to assemble:
1\ d5mm pole with 50mm long x1
2\ M3x4mm screw x2
3\ M3x12mm screw x4
4\ M3x20mm screw with nut x2 (for rig position fix)
5\ d12mm magnet with 3mm thickness x2
6\ d2mm carbon fible pole with 180mm long x1 (top shield base)
7\ d2mm carbon fible pole with 100mm long x2 (side shield base)
Center diameter for maximum lens out ring is 92mm.
Note: Please take "VB-09_light_hood.stl" file for the print orientation example. the thin circle foundation is an optional. you can added if your machine has a build issue and remove it after printer done.
need extra parts to assemble:
1\ d5mm pole with 50mm long x1
2\ M3x4mm screw x2
3\ M3x12mm screw x4
4\ M3x20mm screw with nut x2 (for rig position fix)
5\ d12mm magnet with 3mm thickness x2
6\ d2mm carbon fible pole with 180mm long x1 (top shield base)
7\ d2mm carbon fible pole with 100mm long x2 (side shield base)
Center diameter for maximum lens out ring is 92mm.
Note: Please take "VB-09_light_hood.stl" file for the print orientation example. the thin circle foundation is an optional. you can added if your machine has a build issue and remove it after printer done.