Thingiverse
Light Bar (ASWX1 or other 2020 3D Printer Frame) by Dzinr
by Thingiverse
Last crawled date: 3 years, 4 months ago
LED Light Housing. I created this housing around my own needs which were to light the inside of my chamber as well as have some flexibility (Use 1 or 2, H or O shaped configuration if using 2). Due to moving gantry and Z sync cable, I needed to mount housings on top. I needed the lights to be near the outside perimeter of build plate so the parts weren't in the shadows. I also wanted to maintain access to the filament sensor and top mounted spool holder. Chamber was built first, so the height was determined by the space in my chamber.
Housings were designed for a single t-nut to hold in the t slot rails. I originally designed 4 snap tabs, but due to layer direction, they didn't hold up so well. I modified the design before loading on Thingiverse so that anyone interested can stick a piece of 1.75mm filament thru the holes in 4 locations to hold housing together. This feature I haven't tested as I still am utilizing housings I had, but simple concept and dislike the screws.
I purchased a 5V USB 1M Cool White LED Strip on eBay for under $4. I cut the strip in designated areas between the copper dots in (8) strips with 6 LEDs per strip (approx 4"). I discarded the remaining LED's from the USB cable. I held the 2 housing together and marked the square hole openings on the inside of top housing for proper positioning. Peel the adhesive backing and stick to inside of top housing. I soldered the LED's per wiring sketch which required about 12-14" of cable to connect 2 housing and some light duty wire to connect the LED strips together. Power and ground orientation is important.
Take a look at my other sidewinder X1 upgrades:
https://www.thingiverse.com/thing:4784042 Artillery Sidewinder X1 Extruder Cover V4 w/ Strain Reliefhttps://www.thingiverse.com/thing:4783250 Artillery Sidewinder X1 Left X Cover with Cable Strain Reliefhttps://www.thingiverse.com/thing:4774786 Bed Heater Strain Relief Artillery Sidewinder X1https://www.thingiverse.com/thing:4592828 V Slot Frame Spool Holderhttps://www.thingiverse.com/thing:4563465 ASX1 Runout Sensor Lead Inhttps://www.thingiverse.com/thing:4839858 Artillery Sidewinder X1 TFT Plug Guide
Housings were designed for a single t-nut to hold in the t slot rails. I originally designed 4 snap tabs, but due to layer direction, they didn't hold up so well. I modified the design before loading on Thingiverse so that anyone interested can stick a piece of 1.75mm filament thru the holes in 4 locations to hold housing together. This feature I haven't tested as I still am utilizing housings I had, but simple concept and dislike the screws.
I purchased a 5V USB 1M Cool White LED Strip on eBay for under $4. I cut the strip in designated areas between the copper dots in (8) strips with 6 LEDs per strip (approx 4"). I discarded the remaining LED's from the USB cable. I held the 2 housing together and marked the square hole openings on the inside of top housing for proper positioning. Peel the adhesive backing and stick to inside of top housing. I soldered the LED's per wiring sketch which required about 12-14" of cable to connect 2 housing and some light duty wire to connect the LED strips together. Power and ground orientation is important.
Take a look at my other sidewinder X1 upgrades:
https://www.thingiverse.com/thing:4784042 Artillery Sidewinder X1 Extruder Cover V4 w/ Strain Reliefhttps://www.thingiverse.com/thing:4783250 Artillery Sidewinder X1 Left X Cover with Cable Strain Reliefhttps://www.thingiverse.com/thing:4774786 Bed Heater Strain Relief Artillery Sidewinder X1https://www.thingiverse.com/thing:4592828 V Slot Frame Spool Holderhttps://www.thingiverse.com/thing:4563465 ASX1 Runout Sensor Lead Inhttps://www.thingiverse.com/thing:4839858 Artillery Sidewinder X1 TFT Plug Guide
Similar models
thingiverse
free
Full Width Light Bar by Dzinr
...swx1 or other 2020 3d printer frame)https://www.thingiverse.com/thing:4863723 sidewinder x1 easy firmware flash tft switch mount
thingiverse
free
Artillery Barrage - Sidewinder X1 Mod Compilation by alsolis
...31743
t-nut m3 drop-in rotating v-slot - davinci2000https://www.thingiverse.com/thing:305060
enjoy!
cheers from the philippines!
thingiverse
free
Artillery Sidewinder X1 X-Axis Cover - Strain Relief Compatible by alsolis
...d the design to be able to fit:
sidewinder x1 v4 x ribbon cable strain relief - mdchrishttps://www.thingiverse.com/thing:4578906/
thingiverse
free
Bed Heater Strain Relief Artillery Sidewinder X1 by Dzinr
...the remix info search box doesn't seem to be working tonight so the information is posted above. i'll try to edit later.
thingiverse
free
Artillery Sidewinder X1 Left X Cover with Cable Strain Relief by Dzinr
...//www.thingiverse.com/thing:4592828 v slot frame spool holderhttps://www.thingiverse.com/thing:4563465 asx1 runout sensor lead in
thingiverse
free
Artillery Sidewinder X1 Cable Clamp Strain Relief Quick Release - with Slit by alsolis
... the cable.
this allows full visibility of the cable slot, and prevents damaging during remova and insertion of the ribbon cable.
thingiverse
free
Artillery Sidewinder X1 Cable Clamp Strain Relief Quick Release - with Slit by alsolis
...e cover on. i could not see if the cable is properly aligned. this should help safe guard from that and give you full visibility.
thingiverse
free
Artillery Sidewinder X1 Extruder Cover V4 w/ Strain Relief by Dzinr
...and run it vertically along 2 face surfaces achieving similar grain from layer lines on rest of cover and...
thingiverse
free
Retaining cover for "Artillery Sidewinder X1 Bed Cable Strain Relief" by LeCedre83
... sidewinder x1 (03/2020) bed cable strain relief"
le lien : https://www.thingiverse.com/thing:4235748
plus besoin de rilsan.
thingiverse
free
Artillery X1 Z Cable Strain Relief
...
you'll need 2 m5 t nuts,
2 m5x8 bolts,
and 2 m3x6 bolts
added a spacer for those who did not get it with the original design
Aswx1
thingiverse
free
BIGTREETECH Filament Sensor Holder for ASWX1 or Ender3 by ganti
...gnal manual with the measurements attatched.
requirenments
bigtreetech filament sensor
slider nuts or hammernuts
a pair of screws
thingiverse
free
Filament Spool Holder for ASWX1 (Rotated Stand by 90°, Remix) by ganti
... but should fit a range of 3d printers.
it attaches to 2020 and 2040 aluminium extrusions.
required
m3 bolts t-nuts / hammer nuts
thingiverse
free
Bed Level Calibration Test - 300x300 - ASWX1
...d to be adjusted higher than the rest of the bed in terms of how "tight" the paper felt between the nozzle and the bed.
thingiverse
free
Artillery Sidewinder X1 filament sensor holder by demebel
...thingiverse i want a stable filament sensor for my aswx1 under the ikea lack table roof. it is a...
thingiverse
free
Bed Leveling Wheel Enlarging Ring - Artillery Sidewinder X1 by cdsmakestuff
...size of the bed, the leveling wheels on the aswx1 are tiny... my ce3pro has larger leveling wheels. no...
thingiverse
free
MKS MOSFET Holder - Sidewinder X1 by pappl
...mosfet crimped electric wire ferrules on wire ends. in aswx1facebook group many users experience heating element failures, sometimes due...
thingiverse
free
Artillery Sidewinder TFT Plug Guide by Dzinr
...spool holderhttps://www.thingiverse.com/thing:4563465 asx1 runout sensor lead inhttps://www.thingiverse.com/thing:4849418 light bar (aswx1 or other 2020 3d printer...
thingiverse
free
Full Width Light Bar by Dzinr
...inhttps://www.thingiverse.com/thing:4839858 artillery sidewinder x1 tft plug guidehttps://www.thingiverse.com/thing:4849418 light bar (aswx1 or other 2020 3d printer frame)https://www.thingiverse.com/thing:4863723 sidewinder x1 easy...
thingiverse
free
Minor TFT Button Mods by Dzinr
...inhttps://www.thingiverse.com/thing:4839858 artillery sidewinder x1 tft plug guidehttps://www.thingiverse.com/thing:4849418 light bar (aswx1 or other 2020 3d printer frame)https://www.thingiverse.com/thing:4858847 full width light...
Dzinr
thingiverse
free
Mosfet Bracket by Dzinr
...old reliable folgertech 2020 and was configured for its stock setup. diagonal supports included on ribs so no supports required!
thingiverse
free
Filament Spool Bearing 2020 by Dzinr
... need a lip inside to hold the spool in place. down the road, if there is a problem i might upgrade.
i printed with no supports.
thingiverse
free
X-Acto Gripster Replacement Body by Dzinr
...nd texture.
i added a brim and printed vertical with no issues. tolerances are close. you may have to file the inside slightly.
thingiverse
free
LCD Bracket Folger Tech 2020 by Dzinr
...ch numerous upgrades i have since made to printer including bed leveling knobs, z axis adjustment knob, x axis belt tension knob.
thingiverse
free
Heat Bed Glass Holder by Dzinr
... here: https://www.thingiverse.com/thing:2894364 , and compact z axis adjustment here: https://www.thingiverse.com/thing:3490367
thingiverse
free
Stop & Shop Key Fob Frame by Dzinr
...y layers where probably too wide. you might scale the insert at 98-99% if you need to.
too bad i didn't have purple filament!
thingiverse
free
Lipo Battery Low Voltage Tester Alarm Housing by Dzinr
...depressed when cap is snapped on. if so, just slit the shrink wrap in the corners of the led display enough where they lay flat.
thingiverse
free
Folger Tech 2020 Limit Switch Mount Replacement by Dzinr
...el as that is most crucial.
update. finally created the z axis adjustment found here: https://www.thingiverse.com/thing:3490367
thingiverse
free
Artillery Sidewinder TFT Plug Guide by Dzinr
...hing:4563465 asx1 runout sensor lead inhttps://www.thingiverse.com/thing:4849418 light bar (aswx1 or other 2020 3d printer frame)
thingiverse
free
Full Width Light Bar by Dzinr
...swx1 or other 2020 3d printer frame)https://www.thingiverse.com/thing:4863723 sidewinder x1 easy firmware flash tft switch mount
2020
3d_export
$5
cyberpunk 2020
...cyberpunk 2020
3dexport
cyberpunk 2020
3d_export
$5
monster01 2020
...monster01 2020
3dexport
monster01 2020 dxf file rigged in mixamo.
3d_export
$129
explorer 2020
...explorer 2020
3dexport
3d_export
$5
mug 2020
...mug 2020
3dexport
3d_export
$15
3 rims 2020
...3 rims 2020
3dexport
new rims 2020 from inventor
turbosquid
$7
Keepsake of 2020
...ty free 3d model keepsake of 2020 for download as obj and stl on turbosquid: 3d models for games, architecture, videos. (1657350)
3d_export
$35
landrover 2020
...landrover 2020
3dexport
turbosquid
$15
Timeless 2020
...free 3d model timeless 2020 for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1433362)
turbosquid
$85
Q8 2020
... free 3d model audi q8 2020 for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1559582)
turbosquid
$59
Supra 2020
...ee 3d model supra 2020 for download as max, lwo, obj, and c4d on turbosquid: 3d models for games, architecture, videos. (1404492)
Bar
archibase_planet
free
Bar
...bar
archibase planet
bar bar rack
bar 2 - 3d model for interior 3d visualization.
archibase_planet
free
Bars
...bars
archibase planet
horizontal bar parallel bars
parallel bars - 3d model for interior 3d visualization.
3d_export
$10
bar
...bar
3dexport
modern bar
3d_export
$10
bar
...bar
3dexport
modern bar
3d_export
$10
bar
...bar
3dexport
modern bar
3d_export
$10
bar
...bar
3dexport
modern bar
3d_export
$10
bar
...bar
3dexport
modern bar
3d_export
$10
bar
...bar
3dexport
modern bar
3d_export
$10
bar
...bar
3dexport
modern bar
3d_export
$10
bar
...bar
3dexport
modern bar
Frame
archibase_planet
free
Frame
...frame
archibase planet
frame photo frame
frame n190813 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Frame
...frame
archibase planet
frame photo frame
frame n071113 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3ddd
$1
Frame
...frame
3ddd
frame
3ddd
free
Frame
...frame
3ddd
frame
archibase_planet
free
Frame
...frame
archibase planet
frame mirror frame ornament
frame n260113 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Frame
...frame
archibase planet
frame photo frame
frame photo n190813 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Frame
...frame
archibase planet
frame window window frame
frame 1 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Frame
...frame
archibase planet
frame window frame window
frame 3 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Frame
...frame
archibase planet
frame wall frame decoration
frame 1 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Frame
...frame
archibase planet
frame window window frame
frame 2 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
Printer
archibase_planet
free
Printer
...inter
archibase planet
printer laser printer pc equipment
printer n120614 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Printer
...rchibase planet
laser printer office equipment computer equipment
printer - 3d model (*.gsm+*.3ds) for interior 3d visualization.
turbosquid
$100
Printer
...er
turbosquid
royalty free 3d model printer for download as on turbosquid: 3d models for games, architecture, videos. (1487819)
turbosquid
$3
Printer
...turbosquid
royalty free 3d model printer for download as max on turbosquid: 3d models for games, architecture, videos. (1670230)
turbosquid
$1
printer
...turbosquid
royalty free 3d model printer for download as max on turbosquid: 3d models for games, architecture, videos. (1595546)
turbosquid
$1
printer
...turbosquid
royalty free 3d model printer for download as max on turbosquid: 3d models for games, architecture, videos. (1595105)
turbosquid
$10
Printer
...id
royalty free 3d model printer for download as max and 3dm on turbosquid: 3d models for games, architecture, videos. (1607146)
turbosquid
$7
Printer
...royalty free 3d model printer for download as ma, ma, and obj on turbosquid: 3d models for games, architecture, videos. (1644580)
turbosquid
$30
Printer
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
Printer
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Light
archibase_planet
free
Light
...light
archibase planet
lamp lighting light
light - s2 - 3d model for interior 3d visualization.
archibase_planet
free
Light
...light
archibase planet
light luminaire lighting
light l0465 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$5
lighting
...lighting
3dexport
lighting
3d_export
$5
lighting
...lighting
3dexport
lighting in livingroom
turbosquid
$3
Lighting Tree with Lights
...d model lighting tree with lights for download as max and 3ds on turbosquid: 3d models for games, architecture, videos. (1585507)
archibase_planet
free
Light
...light
archibase planet
luster lighting solution
light - s - 3d model for interior 3d visualization.
archibase_planet
free
Light
...light
archibase planet
luster lamp lighting
light 1 - 3d model for interior 3d visualization.
archibase_planet
free
Lights
...lights
archibase planet
surgical lights surgical lamp
surgical lights (floor) - 3d model for interior 3d visualization.
archibase_planet
free
Light
...light
archibase planet
lighting luminaire candlelight
light l0463 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$18
street light-lighting-light-xia bing
...
3dexport
street light-lighting-light-xia bing<br>max 2015 v-ray 3 max 2015<br>textures<br>all files in zip...
Other
design_connected
$16
ST12 Other
...signconnected
photo-realistic 3d models of the st12 other stool from e15 for 3d architectural and interior design presentations.
turbosquid
$26
Oar and Other
...quid
royalty free 3d model oar and other for download as fbx on turbosquid: 3d models for games, architecture, videos. (1473409)
turbosquid
$5
chair with other
...id
royalty free 3d model chair with other for download as ma on turbosquid: 3d models for games, architecture, videos. (1171468)
3ddd
$1
parfume and other
...parfume and other
3ddd
тумбочка
create by sametyuzer
turbosquid
$79
The Others Collection
...others collection for download as 3ds, max, obj, fbx, and dae on turbosquid: 3d models for games, architecture, videos. (1480228)
turbosquid
$25
Other Man
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
other car.max
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$2
Other Mothers Hand
... 3d model other mothers hand for download as ma, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1663825)
turbosquid
$8
other sport wheel
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$2
pool and other elements
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.