Thingiverse
Liger Zero Zoid parted for printing by printalotapotamus
by Thingiverse
Last crawled date: 4 years, 6 months ago
Check out my Blog where I talk more about 3D printing and painting wargame models.
The Liger Zero Zoid parted out for printing with some minor changes. I lopped off the tail because it looked like it was going to break for sure. Also made the joint knobs a little more flush with the legs, and added some reinforcement beneath the mesh to help the thinner pieces have more strength.
Scaled it up 650% before printing because the original model was very small. I left it original size so you can scale it yourself depending on how big you want it.
The Liger Zero Zoid parted out for printing with some minor changes. I lopped off the tail because it looked like it was going to break for sure. Also made the joint knobs a little more flush with the legs, and added some reinforcement beneath the mesh to help the thinner pieces have more strength.
Scaled it up 650% before printing because the original model was very small. I left it original size so you can scale it yourself depending on how big you want it.