LiftPod - Remixed Bar and inside cap for easy lock by Nonexitor

Last crawled date: 3 years, 5 months ago

I used 30% infill when printing
I modified the models so they fit in to the existing parts for the LiftPod easy lock system. The exiting bar was 10 mm to long. The locking teeth on the cap inside were to long so I shortened them so they inlock with the bar. I also filled in the nut slot be you can use it with the bar. I recommend using a M5 X 30 bolt because the M5 X 25 are a bit short for the bar. I'll update the cap inside model but until then you'll have to file out the hole slightly so the bolt can slide easily. The bar replaces the Bar Symm model. The Hex head M5 bolts go inside
I really like the LifePod system and wanted to add my modifications to hopefully improve it. Thank you HeyVye for making this.
Below is the link to the original itemshttps://www.thingiverse.com/thing:4614515
Version History:
12/23/2020 - I replaced the Inside Cap with a new model that uses the same opening as the original and shorten the nut part so it sits more flush with the arms