CG Trader
LIFEBUOY
by CG Trader
Last crawled date: 1 year, 11 months ago
LIFEBUOY ; I started to make design that 3d model in Rhino 3d 5 . I use Vray 3.0 for render engine. It was a good work . Each modeled surface was analyzed.
I have recorded in about 14 formats and I have opened and examine the model in every 3d program.It opens up smoothly in every program.There is no deterioration on the surfaces.
I opened the 3d model in each program and then I got a screenshot. Please look through the photos carefully!!! Have a Good Dowloading! :) Model Features ; 2.1.1 Lifebuoy specification Every lifebuoy shall:
.1 have an outer diameter of not more than 800 mm and an inner diameter of not less than 400
mm;
.2 be constructed of inherently buoyant material; it shall not depend upon rushes, cork shavings or
granulated cork, any other loose granulated material or any air compartment which depends on
inflation for buoyancy;
.3 be capable of supporting not less than 14.5 kg of iron in fresh water for a period of 24 h;
.4 have a mass of not less than 2.5 kg;
.5 not sustain burning or continue melting after being totally enveloped in a fire for a period of 2 s;
.6 be constructed to withstand a drop into the water from the height at which it is stowed above the
waterline in the lightest seagoing condition or 30 m, whichever is the greater, without impairing
either its operating capability or that of its attached components;
.7 if it is intended to operate the quick release arrangement provided for the self-activated smoke
signals and self-igniting lights, have a mass of not less than 4 kg; and
.8 be fitted with a grabline not less than 9.5 mm in diameter and not less than 4 times the outside
diameter of the body of the buoy in length. The grabline shall be secured at four equidistant
points around the circumference of the buoy to form four equal loops.
2.1.2 Lifebuoy self-igniting lights
Self-igniting lights required by regulation III/7.1.3 shall:
.1 be such that they cannot be extinguished by water;
.2 be of white colour and capable of either burning continuously with a luminous intensity of not
less than 2 cd in all directions of the upper hemisphere or flashing (discharge flashing) at a rate
of not less than 50 flashes and not more than 70 flashes per min with at least the corresponding
effective luminous intensity;
.3 be provided with a source of energy capable of meeting the requirement of paragraph 2.1.2.2
for a period of at least 2 h; and
.4 be capable of withstanding the drop test required by paragraph 2.1.1.6.
2.1.3 Lifebuoy self-activating smoke signals
Self-activating smoke signals required by regulation III/7.1.3 shall:
.1 emit smoke of a highly visible colour at a uniform rate for a period of at least 15 min when
floating in calm water;
.2 not ignite explosively or emit any flame during the entire smoke emission time of the signal;
.3 not be swamped in a seaway;
.4 continue to emit smoke when fully submerged in water for a period of at least 10 s;
.5 be capable of withstanding the drop test required by paragraph 2.1.1.6. and
.6 be provided with a quick-release arrangement that will automatically release and activate the
signal and associated self-igniting light connected to a lifebuoy having a mass of not more than
4 kg.
2.1.4 Buoyant lifelines
Buoyant lifelines required by regulation III/7.1.2 shall:
.1 be non-kinking;
.2 have a diameter of not less than 8 mm; and
.3 have a breaking strength of not less than 5 kN. Model File Formats ; .3dm - Rhino 3D 5
.max - Autodesk 3max 2015
.bip - Keyshot 5
.dwg - Autocad 2014
.c4d - Cinema 4d R17
.skp - Sketch up 2015
.sldprt - Solidworks 2016
.mb - Maya 2014
.lwo - Lightwave 6.0
.igs - Iges 6.0
.stp - Step 2015
.stl - STereoLithography
.3ds - 3d Studio
.catpart - Catia V5
.obj - Wavefront lifebuoy lifejacket boat safety equipment yachtequipment safetyequipment watercraft naval safe yacht sail navy sea ship frigate ocean vessel battleship industrial industrial watercraft navy ship sail boat sail ship
I have recorded in about 14 formats and I have opened and examine the model in every 3d program.It opens up smoothly in every program.There is no deterioration on the surfaces.
I opened the 3d model in each program and then I got a screenshot. Please look through the photos carefully!!! Have a Good Dowloading! :) Model Features ; 2.1.1 Lifebuoy specification Every lifebuoy shall:
.1 have an outer diameter of not more than 800 mm and an inner diameter of not less than 400
mm;
.2 be constructed of inherently buoyant material; it shall not depend upon rushes, cork shavings or
granulated cork, any other loose granulated material or any air compartment which depends on
inflation for buoyancy;
.3 be capable of supporting not less than 14.5 kg of iron in fresh water for a period of 24 h;
.4 have a mass of not less than 2.5 kg;
.5 not sustain burning or continue melting after being totally enveloped in a fire for a period of 2 s;
.6 be constructed to withstand a drop into the water from the height at which it is stowed above the
waterline in the lightest seagoing condition or 30 m, whichever is the greater, without impairing
either its operating capability or that of its attached components;
.7 if it is intended to operate the quick release arrangement provided for the self-activated smoke
signals and self-igniting lights, have a mass of not less than 4 kg; and
.8 be fitted with a grabline not less than 9.5 mm in diameter and not less than 4 times the outside
diameter of the body of the buoy in length. The grabline shall be secured at four equidistant
points around the circumference of the buoy to form four equal loops.
2.1.2 Lifebuoy self-igniting lights
Self-igniting lights required by regulation III/7.1.3 shall:
.1 be such that they cannot be extinguished by water;
.2 be of white colour and capable of either burning continuously with a luminous intensity of not
less than 2 cd in all directions of the upper hemisphere or flashing (discharge flashing) at a rate
of not less than 50 flashes and not more than 70 flashes per min with at least the corresponding
effective luminous intensity;
.3 be provided with a source of energy capable of meeting the requirement of paragraph 2.1.2.2
for a period of at least 2 h; and
.4 be capable of withstanding the drop test required by paragraph 2.1.1.6.
2.1.3 Lifebuoy self-activating smoke signals
Self-activating smoke signals required by regulation III/7.1.3 shall:
.1 emit smoke of a highly visible colour at a uniform rate for a period of at least 15 min when
floating in calm water;
.2 not ignite explosively or emit any flame during the entire smoke emission time of the signal;
.3 not be swamped in a seaway;
.4 continue to emit smoke when fully submerged in water for a period of at least 10 s;
.5 be capable of withstanding the drop test required by paragraph 2.1.1.6. and
.6 be provided with a quick-release arrangement that will automatically release and activate the
signal and associated self-igniting light connected to a lifebuoy having a mass of not more than
4 kg.
2.1.4 Buoyant lifelines
Buoyant lifelines required by regulation III/7.1.2 shall:
.1 be non-kinking;
.2 have a diameter of not less than 8 mm; and
.3 have a breaking strength of not less than 5 kN. Model File Formats ; .3dm - Rhino 3D 5
.max - Autodesk 3max 2015
.bip - Keyshot 5
.dwg - Autocad 2014
.c4d - Cinema 4d R17
.skp - Sketch up 2015
.sldprt - Solidworks 2016
.mb - Maya 2014
.lwo - Lightwave 6.0
.igs - Iges 6.0
.stp - Step 2015
.stl - STereoLithography
.3ds - 3d Studio
.catpart - Catia V5
.obj - Wavefront lifebuoy lifejacket boat safety equipment yachtequipment safetyequipment watercraft naval safe yacht sail navy sea ship frigate ocean vessel battleship industrial industrial watercraft navy ship sail boat sail ship
Similar models
cg_trader
$19
Lifebuoy | 3D
...l as for buoyant shoes and balancing sticks for walking on water. safety rescue emergency sea water ship resquer miniatures other
cg_trader
$15
Lifebuoy 3d printed | 3D
...oat sunlight emote stylized safety saving buoyancy boat ship watercraft marine naval shipping shipper games toys games toys other
grabcad
free
Agv Minion
...agv minion
grabcad
automated guided vehicle for indoor with capability to pull trolley less than 150 kg
thingiverse
free
Dry Erase Marker Magnetic Holder by VladimirR
...esigned for markers with diameter less than 19 mm
2) requires four cylindrical permanent magnets (6 mm diameter, 5 mm max height)
grabcad
free
Roof-Top Water Tank Stand
... tank stand
grabcad
this water tank can fit max. of 4 tanks of 1000 liters each and can withstand the weight of at least 4 tons.
thingiverse
free
Hook by RobinChico
... robinchico
thingiverse
infill: 20%
filament: pla
perimeter: 3 or 4
should withstand up to 10 to 20 kg, at least what i printed.
grabcad
free
Ball roller
...ball roller
grabcad
ball roller with circular flange capable of withstanding 46 kgs of allowable load
grabcad
free
Desalination device
...e water at better rate in eliptical shaped device.
water will be collected in separate device (bottle) attached with the device.
thingiverse
free
Pot handle
...hould be printed in abs to withstand the heat from the boiling water in the pot. fastened with a 3.8 diameter self-tapping screw.
thingiverse
free
Creality Ender 5 Plus LED Light Strip Mount by Georg-Zeimet
...he angle. (see pictures).
self-adhesive led strip 10mm wide and less than 3meters
i hope you enjoy this upgrade for your printer.
Lifebuoy
3d_ocean
$4
Lifebuoy
...lifebuoy
3docean
lifebuoy swimming water lifebouy
simple lifebuoy.
archibase_planet
free
Lifebuoy
...lifebuoy
archibase planet
lifebuoy ring-buoy
lifebuoy n191213 - 3d model (*.gsm+*.3ds+*.max) for interior 3d visualization.
3d_export
free
lifebuoy
...lifebuoy
3dexport
turbosquid
$26
Lifebuoy
...urbosquid
royalty free 3d model lifebuoy for download as fbx on turbosquid: 3d models for games, architecture, videos. (1197212)
turbosquid
$5
Lifebuoy
...
royalty free 3d model lifebuoy for download as unitypackage on turbosquid: 3d models for games, architecture, videos. (1165508)
turbosquid
$24
Lifebuoy
...yalty free 3d model lifebuoy for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1204023)
turbosquid
$149
Lifebuoy
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
Lifebuoy
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_ocean
$3
Lifebuoy
...ow polygonal model, easy to animate. - poly count: 400 - formats: max /obj /fbx/3ds/dxf - high detail was preserved with 2048×...
3d_ocean
$3
Lifebuoy
...model of lifebuoy model centered at origin v-ray 2 studio render setting ready 3ds, fbx, obj files: high & low poly included