Thingiverse

LIDL glider frontal camera cone (micro AIO) by Kikerumbo
by Thingiverse
Last crawled date: 4 years, 5 months ago
Wanted a frontal camera placement, so I designed this. I'm learning so, feel free to comment.
It was designed for a AKK AIO with OSD. Similar to the Eachine TX03, but with OSD. 200mW also.
The square is 20mm x 19mm. Holes are for 3mm screws and the bottom has the hole for a M3 nylock nut.
Also, there's no cut for the antenna, since I'm going to use a pigtail to put the antenna at the center of the plane. I'll post pictures as soon as I finish it and before maiden/crash/destroy it.
It was designed for a AKK AIO with OSD. Similar to the Eachine TX03, but with OSD. 200mW also.
The square is 20mm x 19mm. Holes are for 3mm screws and the bottom has the hole for a M3 nylock nut.
Also, there's no cut for the antenna, since I'm going to use a pigtail to put the antenna at the center of the plane. I'll post pictures as soon as I finish it and before maiden/crash/destroy it.