Lens Filter Adaptor Ø62mm for square filter 100mm + 150mm by Poliflex

Last crawled date: 3 years, 1 month ago

This adapter fits on a Ø 62mm OD lens. I designed it for my Olympus 8mm Fisheye.
It consists out of two components. In my case no glue was required to mount the parts together. so I can disassemble them for transportation reason for example. It safes space if you orientate the lens side for tranportation reasons into the frame (turn it 180°)
Due to the wide angle it requires a larger filter but even with a 150mm x 100mm filter (landscape orientation) I do still get dark corners (vignetting+ ;-)). I gues a 150 x 150mm Square opening will fix this problem but requires a larger filter to be inserted.
The 2 rails and the screws to hold the filder are Haida parts taken fom my Haida 100mm filter holder.
Please note that the opening (lens side) is larger to accommodate felt that needs to be glued on to avoid scratching on the lensbody.The thickness of the felt must be approx. 3 mm. I do share other adaptors for different diameters - to be found wihtin my creations.