Thingiverse
Legrand On-Q Mounting Brackets (Flush) by gnforcer
by Thingiverse
Last crawled date: 4 years, 5 months ago
Designed to clip into the 6" on center Legrand ON-Q Structured Cable boxes.
Great for mounting powerbricks and such.
Grooves on the back to hold velcro or zip ties in place.
Print at 0.2-0.4
10-30% infill
Use Supports! (or the clips come out messy)
You may need to flip the model to lay flat before printing
+Supports!
Designed in OpenSCAD; scad files attached.
Sliced in Cura
Printed on a Longer LK5 Pro 0.2 15% infill
Great for mounting powerbricks and such.
Grooves on the back to hold velcro or zip ties in place.
Print at 0.2-0.4
10-30% infill
Use Supports! (or the clips come out messy)
You may need to flip the model to lay flat before printing
+Supports!
Designed in OpenSCAD; scad files attached.
Sliced in Cura
Printed on a Longer LK5 Pro 0.2 15% infill