Lego Picture Frame by parupar

Last crawled date: 3 years, 1 month ago

A Lego themed picture frame for a 6x4 in picture. The picture is held in place using Lego pieces (see the included pictures). These Lego pieces can be printed (I used 2419_1x.stl from https://www.thingiverse.com/thing:2411971/) or from extras you have lying around. The frame can be hung from the wall using the included nail holes or held in place with the included stand. No supports are required.
In my example, I put a 1mm (0.040 in thick) plexiglass sheet in front of the picture. These can be purchased for a couple of dollars from Amazon.
If printing on a heated print bed, let the print cool to room temperature before removing. If not, the frame could warp. This is a common problem with thin, plane-like prints.
The picture frame can be printed on Prusa Mini. Just turn off the skirt so that the print will fits.